730175

Xiaomi Roborock Robot Vacuum Cleaner Manual

11
Zoom out
Zoom in
Previous page
1/13
Next page
Troubleshooting
If a malfunction occurs during a cleaning, the ring-shaped indicator of the device starts to
ash rapidly in red and the voice message will turn on.
Recommendations
Error 1: Slightly turn the laser (orange) rangender, to ensure unobstruction of its motion.
The normal operation of the laser distance sensor is prevented by other foreign objects.
Please wipe the sensors, remove excess items; If you do not have the opportunity to
remove excess items, move the vacuum cleaner to another location.
Error 2: Wipe and lightly press the collision sensor.
In the event of a malfunction of the collision sensor, repeatedly press it to remove all
foreign objects; If there are no foreign objects, move the vacuum cleaner to another place.
Error 3: Move the vacuum cleaner to a dierent location.
The wheel is in a suspended state, move the vacuum cleaner to another location.
Error 4: Wipe the fall sensor and move the vacuum cleaner away from the edge
(for example, from a step).
The fall sensor does not identify underneath the supports, move the vacuum cleaner to
another place; The sensor of the fall is too dirty, so problems can occur. Please clean the
dip sensor.
Error 5: Pull out the main brush. It is necessary to clean the brush and x of the main axis
of the brush.
Foreign objects can be wound around the main brush, it is necessary to clean the brush
and x the main axis of the brush.
Error 6: Pull and clean side brushes.
Foreign objects can be wound around the side brush; it is necessary to clean the brush.
Error 7: Make sure that no foreign objects have entered the main wheel and move the
device to a new location.
Foreign objects can be wound around the wheel; remove and clean the wheel.
Error 8: Provide enough space around the vacuum cleaner.
It is possible to entangle the vacuum cleaner or it can get stuck between other objects,
please provide enough space around the vacuum cleaner.
Error 9: Install the dust bag and lter.
Install the dust bag and lter, and make sure they are installed correctly; If the device
continues to show an error, try replacing the lter; After rinsing the lter, leave it to dry for
24 hours.
Error 10: Make sure the lter is dry or rinse the lter.
It is possible to get foreign objects in the lter, make sure it is clean; if the problem
persists, replace the lter.
Error 11: A strong magnetic eld is detected, move the vacuum cleaner away from the
special tape (virtual wall).
The vacuum cleaner is too close to the special tape (virtual wall), please move the device
to a dierent location.
Error 12: Charge level is too low, charge the device.
Charge level is too low, charge the device.
Error 13: The problems with charging, make sure the contact between a vacuum cleaner
and a docking station.
Using a dry cloth, wipe the contact areas of the device and the docking station.
Error 14: Problems with charging.
The battery temperature is too high or too low. Wait until the battery temperature is normal.
Error 15: Wipe the distance to the wall sensor.
A sensor for determining the distance to the wall can settle a lot of dust, carefully wipe it.
Error 16: Install the vacuum cleaner on a at surface and turn on the device.
The device is on an uneven surface, move the vacuum cleaner to a at surface and restart
the computer.
Error 17: Problems with the operation of the side brushes, please reset the system
settings.
Occurrence of problems with the operation of the side brushes, perform a system reset.
Error 18: Problems with the operation of the suction fan, reset the system.
If there are problems with the operation of the suction fan, reset the system.
Troubleshooting
… 11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi Roborock Robot Vacuum Cleaner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi Roborock Robot Vacuum Cleaner in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info