730157

Xiaomi MiJia Honeywell Smoke Detector Manual

3
Zoom out
Zoom in
Previous page
1/5
Next page
Fire alarm Function
1. Detection of smoke
In the case of smoke detection, a light and sound alarm immediately triggers.
2. Ignition
Immediately take appropriate measures, for example, call 119, use re ghting
equipment, etc.
3. In case of elimination of ignition, click on the «Sound stop / Self-check» button
to turn o the alarm.
* The indicator will not light up on the device for 70 seconds and there will be no
beep. After 70 seconds, the device will resume its normal operation.
4. Note: the circumstances, under which a re alarm can trigger
A) Direct contact of the device with spray from insects, cosmetic and other means;
(B) Cigarette smoke, aromatic resin and other incendiary substances may cause
an alarm;
C) Use of evaporating insecticides;
D) Smoke or steam when cooking;
E) Condensation on the device.
Honeywell Smoke Detector Faults
1. Problems with ability to perform automatic measurements.
If the alarm does not detect the presence of smoke (there is a malfunction),
contact the supplier, or the customer service department, to nd out the cause
of the problem as quickly as possible and x it. If the device does not detect
the presence of smoke in the room, the alarm will not work in the event of an
emergency.
2. Problems with soundproong
a. When the Honeywell Smoke Detector detects a malfunction, the status light
ashes three times in yellow (at intervals of 48 seconds) simultaneously with the
corresponding three-time beep. Contact your service representative as soon as
possible to determine the cause of the problem and perform maintenance;
B. If the fault signal has tripped, press the «Sound Stop / Self-Check» button to
turn o the alarm sound for about 12 hours;
C. After disabling the fault alarm, press and hold the «Sound Stop / Self-Check»
button for 3 seconds to restore the normal operation of the fault signal.
Installation (modeling) of a sound signal
1. Press and hold the «Sound stop / Self-check» button for 3 seconds, after which
the red indicator will begin to ash and beeps will turn on, the alarm goes into the
simulation mode of the alarm sound;
2. When you release the «Sound stop / Self-check» button, the indicator stops
ashing and the alarm stops sounding, the alarm goes o from the simulation
mode of the alarm sound;
* If the battery level is low, the alarm sound simulation mode is not available;
When testing the sound simulation mode, please keep a close distance to the
alarm.
Self-check function
Press and hold the «Sound stop / Self-check» button for 1 second.
* It is recommended to perform a self-test of the device once a month. If there is
a problem, repair the device.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi MiJia Honeywell Smoke Detector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi MiJia Honeywell Smoke Detector in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info