730157
2
Zoom out
Zoom in
Previous page
1/5
Next page
Installation
1. Fastening with screws
A) Insert a battery into battery compartment, press and hold the «Sound stop
/ Self-check» button for 1 second. Make sure that the red-yellow indicator is
ashing on the device, after which you will hear a corresponding beep;
B) Drill holes in the ceiling with a perforator;
C) Insert the dowels;
D) Using self-tapping screws, attach the mounting plate;
E) Attach the main alarm panel to the mounting panel in accordance with all the
index marks, scroll clockwise until you hear a click, that indicates xation of the
device.
Using self-tapping screws, install the mounting plate.
Attach the main alarm panel to the mounting panel in accordance with all the
index marks.
Scroll clockwise until it clicks.
2. Mounting with adhesive tape
A) Insert a battery into the battery compartment, press and hold the «Sound
stop / Self-check» button for 1 second. Make sure that the red-yellow indicator is
ashing on the device, after which you will hear a corresponding beep;
B) Remove the protective lm from one side of the adhesive tape and attach it to
the back of the mounting panel;
C) Remove the protective lm from the other side of the adhesive tape and attach
3. Precautions during installation
A) The device is only used indoors;
B) The distance between the device and the lighting equipment should be more
than 50 cm;
C) Do not install the device in a bathroom, in areas, where water easily enters;
D) Do not install near any heat sources or steam;
E) Do not install the unit in rooms with a temperature of -10 ° C and lower or 55 °
C or higher;
F) If the cabinet is suciently close to the ceiling, the distance between the
cabinet and the independent re alarm should be 60 cm or more;
G) The distance between the device and the hood, the air conditioner and the
vent windows (openings) should be more than 150 cm;
H) It is recommended to install the device with screws. If you have chosen a
method, using adhesive tape, in the event of an unforeseen situation, the user is
solely responsible;
I) If you use the device mounting method, using adhesive tape, the selected
mounting surface must be smooth, at, dry and clean;
J) If you have chosen a method using adhesive tape, it is necessary to regularly
check the reliability of fastening the device to avoid its falling;
K) If the battery leaks, you will not be able to install the device into the mounting
panel.
the mounting plate to the ceiling;
D) Attach the main alarm panel to the mounting panel in accordance with all the
index marks, scroll clockwise until you hear a click, that indicates the xation of
the device.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi MiJia Honeywell Smoke Detector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi MiJia Honeywell Smoke Detector in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info