610839

Xerox WorkCentre Xi70c Manual

62
Zoom out
Zoom in
Previous page
1/75
Next page
56
• Check that the size and weight of the paper
you are using are within the limits allowed.
• Make sure the correct paper size, type and
source is selected in the Paper/Output tab
of the Printer Status Monitor and/or in the
Features menu.
Media is not feeding or
misfeeding into WorkCentre
• Check that the media is within the
specifications.
• Fan media thoroughly before reloading into
the input tray.
• Make sure the lateral and rear guides on
input tray are positioned correctly against
the paper edges.
• Make sure the correct settings in Copy
Feature menu/Properties in WorkCentre
printer driver for the currently loaded paper.
• Remove the sheet(s) that have caused the
jam; remove all the media from the input
tray; check for and removed damaged or
curled paper; reload media in input tray.
Media is not exiting the
WorkCentre
• Make sure you have selected the
WorkCentre as the output device.
Printout is slanted or skewed
• Make sure that the paper is of a
manufacturer approved type and that it is
loaded correctly in the paper tray and that
the adjustable lateral and rear guides are
properly closed against the paper.
Load only ONE type of paper at a time in the
paper tray and make sure this type is
selected in the corresponding Properties
dialog box in your WorkCentre driver.
Problems with print
Lines / dots are missing or
faint from the copied/printed
characters
• Remove and re-insert the print cartridges,
making sure they are placed correctly in the
carriage.
• Perform aligning the cartridge process.
• Run the Clean function: if the quality does
not improve, remove and clean the print
head(s) manually, then print a test page to
verify the print cartridge(s) condition, and if
empty, replace cartridge(s).
Remember to align the print cartridges
whenever you replace them.
Problems when printing
Print test did not run
• Switch off the WorkCentre, wait a few
seconds and then switch it on again.
Repeat the correct button sequence (see
“Tools menu “ in Control Panel or click the
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre Xi70c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre Xi70c in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info