610839
61
Zoom out
Zoom in
Previous page
1/75
Next page
55
Troubleshooting
If you have problems operating your WorkCentre, or are unable to perform
the operation you require, first check that you have followed correctly the
instructions given in this manual or the section How to... in the On-Line
Guide loaded with the drivers. If, after repeating the procedure, you still
have a problem, consult the following Problems and solutions table or
further information on the specific topic in Troubleshooting in the On-Line
Guide.
During normal operation, an error condition will be signaled on the LCD
and/or by the corresponding light indicators and/or an error message on
your PC screen.
If you detect serious mechanical damage to or a failure in the WorkCentre,
do not attempt to repair it yourself! CALL 1-800-Team-XRX (1-800-832-
6979).
Problem Solution
Missing or damaged parts.
Check the box thoroughly.
Contact your Xerox help line immediately.
WorkCentre is not powered
(the READY light indicator is
not lit).
Check that the WorkCentre is connected
properly to the electrical power supply
socket.
Check that the WorkCentre is switched on.
Try the WorkCentre in a different wall outlet,
if still no power, call 1-800-Team-XRX.
Printer Status Monitor not
active
Check that the parallel cable between the
WorkCentre and the computer is connected
correctly to both ports. Use the parallel
cable supplied with your WorkCentre or a
standard, bi-directional IEEE 1284-type
parallel cable.
Switch off the WorkCentre, wait a few
seconds and then switch the WorkCentre on
again. If the Status monitor does not
respond, switch off and disconnect
completely the WorkCentre and call 1-800-
Team-XRX.
Problems with paper
Input PAPER light indicator is
flashing.
There is no paper in the paper tray.
Load paper, following the instructions given in
Loading paper” in Installation.
Paper Jam light is on
Reference: Clearing Paper Jam “ in the
manual.
Check that the paper is positioned correctly
in the input tray.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre Xi70c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre Xi70c in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info