610845
20
Zoom out
Zoom in
Previous page
1/63
Next page
12
Power Reduction / Auto Clear
Power Reduction Modes automatically reduce power consumed by the
WorkCentre when the WorkCentre has not been used for a set period of
time. There are two modes of power reduction; Power Save, and Power
Shut-off.
Power Save Mode – The Ready Indicator will flash and the other indicators
will remain on. To copy from the Power Save mode select the desired
features and press Start. The copies will be made automatically.
Power Shut-Off Mode – When the WorkCentre enters the power shut-off
mode the Ready Indicator will flash and the other indicators will turn off. To
copy from the power shut-off mode, press the Start button, then, select the
desired features and press Start again. The copies will be made
automatically.
Auto Clear – This WorkCentre is enabled at the factory to return to the
Normal Copy Mode approximately one minute after a job is completed.
Unless otherwise programmed, the Normal copy Mode settings are as
follows:
Copy Quality – Auto
Copy Lighter/Darker – Normal
Priority Tray – Tray 1
Priority Magnification – 100%
Quantity Selected – 1
Note: Time periods for the Power Shut-Off, Power Save, and Auto Clear
modes can be modified to meet your specific copying needs. Refer to
Customizing Your WorkCentre section of this User Guide for information
about changing these settings.
Auto Copy Function
This function provides the ability to program a copy job while the copier is
warming up, or to pause a print job to enable copying.
1. Program the copy job.
2. Press Start.
The current page will be completed if printing is in process.
3. When the copy job is completed, press the On-line/Off-line button to
immediately return to the print job.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre XD 104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XD 104 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info