Print WorkCentre
®
5845/5855/5865/5875/5890
User Guide 495
Print From
Printing a Saved Job using the Print From Feature
The Print From feature prints jobs which have been saved on the device or on a USB stick. This is a
useful feature if you have documents that you need to print regularly.
Note: This option must be made available by your System Administrator.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Print From feature.
Use Print From Saved Jobs to print jobs which have been saved in a folder on the device using the
Saved Jobs feature.
Saved Jobs are documents that are sent to the device and stored there for future use. Saved jobs
can be accessed and printed at the device and from Internet Services.
1. Press the Clear All button on the control panel to cancel any previous programming selections.
2. Press the Services Home button.
3. Select the Print From... button on the touch screen.
4. Select the Saved Jobs... button.
5. Select the folder required.
6. Select the saved job required.
7. Select any options required.
8. Select the Paper Supply button.
9. Select the Paper Supply option required.
• Automatically Select lets the device select the appropriate paper size for each original
based on the size of the original and reduce or enlarge programming.
• Select a paper tray that contains the size and type of paper you require. The size and media
loaded in each tray is displayed.
10. Select the OK button.
11. Select the 2-Sided Printing button.
12. Select the 2-Sided Scanning option required.
• 1-Sided use this option if your originals are printed on 1 side.
• 2-Sided use this option if your originals are 2-sided. The document feeder must be used to
scan your originals with this option.
• 2-Sided, Rotate Side 2 use this option if your originals are 2-sided and open up like a
calendar. The document feeder must be used to scan your originals with this option.
13. Select the Finishing button to select a specific finishing option for the output, or select Auto
for the device to choose an appropriate option.
14. Press the Start button on the Control Panel to print the job.
15. If the job is a secure job, enter the passcode required and select OK.
16. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
