610813
297
Zoom out
Zoom in
Previous page
1/328
Next page
Troubleshooting
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
General Care and Troubleshooting
297
Paper Curls Load the paper in the paper trays with the seam side of the paper up.
Load the paper in the Bypass Tray with the seam side down.
Load non-standard media in the Bypass Tray.
If the paper curls excessively, flip the paper over in the applicable paper
tray.
The Finisher does not stack the
output correctly
Unload the finisher tray frequently.
Do not remove stapled sets while the finisher is compiling.
Check the paper tray guides are locked into position against the paper.
When using large paper, remove any output contained in the Stacker
Tray.
Load the paper in the paper trays with the seam side of the paper up.
Load the paper in the Bypass Tray with the seam side down.
Load non-standard media in the Bypass Tray.
If the paper curls excessively, flip the paper over in the applicable paper
tray.
Check the correct paper size has been selected for the paper loaded in
the tray.
The Finisher does not staple or
hole punch correctly
To correct stapling problems, ensure the maximum number of sheets is
not exceeded for the finisher being used.
The maximum number of sheets when stapling heavyweight paper is
determined by the finisher type. The Basic Office Finisher staples 12
sheets of heavyweight paper, the Office Finisher staples 20 sheets of
heavyweight paper, and the High Volume Finisher staples 30 sheets.
Check the correct option has been selected on the touch screen.
Check the touch screen for a fault message indicating no staples.
Replace the staple cartridge.
When using large paper, remove any output contained in the Stacker
Tray.
Check that the hole punch waste container is not full. The hole punch
waste container collects waste from the hole punch.
Check the correct paper size has been selected for the paper loaded in
the tray.
Check the paper tray guides are locked into position against the paper.
Stray marks or black marks
from hole punched originals are
not removed
•Use the Edge Erase option to erase the edge with the punched holes.
Refer to Edge Erase on page 54 of Copy.
Copy from the document glass with the document cover or document
feeder down.
Images are out of sequence or
upside down when the Booklet
Creation feature is used
Ensure that the originals are in the correct sequence.
Feed LEF originals to SEF orientated paper.
Enable the display options for Booklet Creation and ensure that the
correct sequence is selected (i.e. Left to Right or Right to Left).
The output is blank Ensure the originals are loaded either face up in the document feeder or
face down on the document glass in the top right position.
Problem Potential Solution
297


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5775 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5775 in the language / languages: English as an attachment in your email.

The manual is 7,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5775

Xerox WorkCentre 5775 User Manual - German - 326 pages

Xerox WorkCentre 5775 User Manual - Dutch - 338 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info