610812
234
Zoom out
Zoom in
Previous page
1/328
Next page
Media Types
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Paper and Media
234
Labels Labels that have been
designed for laser devices,
such as Xerox Labels are
supported. The adhesives
are designed to withstand
the higher temperatures of
these devices without
bleeding and causing
spotting or damage to the
internal components.
Note: Dry gum labels can
cause dry particles of glue
to detach from the backing
and should not be used.
Labels should be left in the printing environment for
72 hours before being used in the printer to allow
them to adjust to the ambient temperature.
Leave labels sealed in their plastic wrapping until
they are ready to be loaded into the printer.
Bypass Tray:
Load labels face-up in the Bypass Tray with the
top towards the front of the device.
Note: Do not fan the label sheets before use unless
the package instructs you to do so. If jamming or
multi-sheet feeding occurs shuffle the labels before
loading. Labels can only be printed 1-sided.
Pre-Cut Tabs Tabs are used as dividers in
documents. Your device
can accommodate tabs
with 1 to 10 tabs and
weights of up to 200
gsm
(53 lb bond).
Note: Do not use tabs with
bent corners. They can
cause feeding related
problems. If a tab is bent,
remove it from the set and
replace it with an
undamaged tab in the
same position.
Trays 1and 2:
Load pre-cut tabs in the tray with the tab edge to
the right (on the trailing edge) with the top tab to
the front of the tray.
Bypass Tray:
Load pre-cut tabs in the Bypass Tray with the tab
edge to the left (on the trailing edge) with the top
tab to the front of the tray.
Ensure the tab sequence and number of tab sets is
correct for the document being copied or printed, and
the quantity required.
For information about programing a tab job, refer to
Build Job on page 63 for copy jobs and Add
Exceptions on page 161 for print jobs.
Heavyweight Use this media type for
feeding heavyweight paper
and card. The maximum
weight which can be fed is
216
gsm (56 lb bond).
Trays 1, 2, 3 and 4:
Load up to 200 gsm (53 lb bond) paper.
Tray 5 and Bypass Tray:
Load up to 216 gsm (56 lb bond) paper or card.
Paper capacities are reduced for heavyweight paper,
ensure the paper does not exceed the maximum fill
line in each tray.
Rough Surface
(optional on some
configurations)
Use this media type for
paper which has a rough
surface.
Rough Surface paper can be loaded in any tray.
Media Type Description Loading Instructions
234


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5765 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5765 in the language / languages: English as an attachment in your email.

The manual is 7,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5765

Xerox WorkCentre 5765 User Manual - German - 326 pages

Xerox WorkCentre 5765 User Manual - Dutch - 338 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info