610812
233
Zoom out
Zoom in
Previous page
1/328
Next page
Media Types
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Paper and Media
233
Media Types
This section describes the different types of media which can be loaded in your device. For further
information about media types and specifications, refer to www.xerox.com.
The Type can be selected from a drop-down menu for the adjustable trays. It is important to select the
correct Type setting for the media loaded in each tray. The device can detect different types of media
as it travels through the paper path and will halt a job if a mismatch occurs.
The following table identifies the media types available, a description of each type and the tray
loading instructions.
Media Type Description Loading Instructions
Plain, Recycled and
Bond
The device supports media
that has been designed for
laser devices, such as Xerox
Recycled paper.
Plain, Recycled and Bond paper can be loaded in any
tray.
Carbonless paper can also be used with this media
type, instructions for use are provided with the paper.
Punched Used for hole punched and
perforated media which
has two or more holes
along one edge for use in
ring binders and
notebooks.
Before loading hole punched media make sure that
any plugs (the round pieces cut out of the paper to
create the holes) do not remain in the stack. Fan the
media to separate the individual sheets.
Trays 1, 2, 3 and 4:
Load paper face-down with the holes on the left
edge.
Tray 5 and Bypass Tray:
Load paper face-up with the holes on the right.
Transparency Used to create images that
can be projected on to a
screen for presentations, or
as covers. Transparencies
are made of polyester film
coated with a chemical
substance. Clear
transparencies allow
maximum presentation
space.
Bypass Tray only:
Load paper-backed transparencies face-up with
the adhesive side to the right.
Load transparencies which have a white strip
along one edge with the strip to the right and on
the underside of the transparencies.
Load transparencies on top of a small stack of
same-size paper and fan transparencies to stop
them sticking together.
If a coating of oil remains on the transparency
after printing, remove it with a lint free cloth.
Letterhead and Pre-
printed
Used for pre-printed, forms
and letterhead paper.
Trays 1, 2, 3 and 4:
Load pre-printed paper face-down with the top to
the front of the device.
Tray 5 and Bypass Tray:
Load pre-printed paper face-up with the top to
the front of the device.
233


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5765 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5765 in the language / languages: English as an attachment in your email.

The manual is 7,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5765

Xerox WorkCentre 5765 User Manual - German - 326 pages

Xerox WorkCentre 5765 User Manual - Dutch - 338 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info