Manual Xeoos Twinfire (page 11 of 15) (English)

706614

Zoom out

Zoom in

1/15

Revised 10-006 Page 11 of 15

Operation

For continued operation, additional wood fuel should be added to the fire when the flames in the

upper combustion chamber have died down, but there are still enough hot coals available. Open

the door slowly to prevent the flames and ashes from falling out. When opening the door the

integrated door handle prevents the buildup of excessive smoke into the living space. The first

45° of the movement of the handle will turn the stove into the heating up mode. If you move the

handle another 45° into the vertical position the door unlocks.

Handle functions:

Again please open the stove door with caution - this enables a stable flow and avoids disruptive

turbulence in the fire chamber. After loading the wood, close the door, and when there is enough

flame, adjust the handle to the "Twinfire" position.

Caution: Do not strike or slam the glass door when closing.

If the Twinfire stove is operated continually at a high output rate in the position of

"heat up" the danger of overheating exists. The handle setting serves, as the

name states, exclusively for initial heating up the stove.

If the fire has burned down too far, put more fuel on the fire and leave the handle in the position

of "Heat up" until more of a flame develops. If the firebox and chimney are still warm, it normally

takes only a few minutes to restart.

The stove’s output is regulated through the Twinfire air control; to reduce the heat output tilt the

knob forward; to increase the heat output tilt the knob backward. The stove’s heating output is

mainly determined by the amount of burned wood.

ALSO NEVER ADD MORE THAN 3-4 POUNDS (1.5-2 KG) OF WOOD (ABOUT

1-2 LOGS). OTHERWISE THE STOVE COULD GET OVERHEATED, WHICH

CAN CAUSE IRREPARABLE DAMAGE.

THIS KIND OF DAMAGE IS NOT COVERED BY WARRANTY.

If there is a situation of a poor draft, the stove should not be reduced to the lowest setting of the

Twinfire air control, or heating up will take longer. Place small pieces of wood until the chimney

is well heated. This can take up to one to two hours. The combustion is optimal when the flames

glow light yellow to blue. If too high, use fewer and larger pieces of wood and adjust the air con-

trol. Caution: Open the door only for short periods of time.

Heat up

Door unlocked 

Twinfire 

Hi, how do you replace the fire bricks in the upper chamber of a Xeoos harmony twin fire wood burner Submitted on 6-10-2022 at 20:08
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xeoos Twinfire in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xeoos Twinfire

Xeoos Twinfire User Manual - German - 20 pages

Xeoos Twinfire User Manual - Dutch - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xeoos Twinfire Manual

Product: