Manual Xeoos Twinfire (page 13 of 15) (English)

706614

Zoom out

Zoom in

1/15

Revised 10-006 Page 13 of 15

Cleaning and Maintenance

Cleaning the Twinfire stove is periodically necessary. Efficient combustion and optimized air

through ducts can ensure the upkeep of your product. Insure that cleaning and maintenance

have been done correctly and be sure to inspect your fire chamber. Empty the ash pan regularly.

Empty Out Ash Pan

To remove the ashes first let stove cool down. Then open the combustion chamber door and pull

out ash pan. We recommend that you always leave a layer of ash approximately 1 inch (2 cm)

deep in the upper fire chamber, since this allows better combustion during the heating.

Disposal of Ashes - Ashes should be placed in a metal container with a tight fitting lid.

The closed container of ashes should be placed on a noncombustible floor or on

the ground, well away from all combustible materials, pending final disposal. If the

ashes are disposed of by burial in soil or otherwise locally dispersed, they should

be retained in the closed container until all cinders have thoroughly cooled.

Cleaning or Replacing the Glass Pane

The construction of the fire chamber glass makes it necessary to be cleaned after long usage or

when improper fuel is burnt. If there is soot build up, we recommend using a glass cleaner or dip

a damp paper towel into the cool ashes to clean the glass plate. Remember to clean the glass

ONLY when the stove is cold. If the glass breaks, it is necessary to replace the glass (use only

approved Twinfire glass and should be done by an approved professional) and gasket. First

carefully unscrew and remove the top and bottom brackets, remove the old and insert the new

glass and gasket, and replace the brackets.

Do not use any sharp articles or abrasive cleaners to clean the glass plate, in

order not to damage the glass. Do not use aggressive cleaning agents for

cleaning the glass plates, since sometimes they can cause damage to the

gasket around the plate.

Cleaning the Chimney and Baffle Plates

The chimney and basic servicing should be cleaned annually by a qualified Chimney

Sweep. The stove and baffle plates (vermiculite-plates) have to be removed cautiously to avoid

breakage. Also you can easily do the cleaning of the supply air openings in the upper combus-

tion chamber and the smoke gas openings in the lower combustion chamber yourself with a va-

cuum cleaner from time to time. Vacuum the port in the double bottom. Also clean the grate by

knocking off the carbon crusts.

Maintenance Activities

Door-hinges and locks need occasional care. As needed the brass bearing on the door handle

can be greased with heat-resistant graphite or Teflon-grease. Also, you can obtain spray cans

from your dealer to touch-up scratches in the paint.

Hi, how do you replace the fire bricks in the upper chamber of a Xeoos harmony twin fire wood burner Submitted on 6-10-2022 at 20:08
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xeoos Twinfire in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xeoos Twinfire

Xeoos Twinfire User Manual - German - 20 pages

Xeoos Twinfire User Manual - Dutch - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xeoos Twinfire Manual

Product: