684726

Xenteq TBC 600 Manual

19
Zoom out
Zoom in
Previous page
1/42
Next page
19
EN
If after the adjustment of the temperature sensor the ‘mode’ button is not used for a
duration of 10 seconds the charger will exit the set-up mode. If at that time a battery
has already been connected then the charging process will start according to the selected
program.
The selected settings will always briefly light up when turning on the charger. In the
appendix you will find a brief list of all the charge settings.
If the mains voltage supply is removed, the last chosen charging program will remain in
the memory of the battery charger. In the case the charger will next be utilized for a
different function than the previous one then the proper adjustments will have to be
made to the charging program.
IN ST AL LAT ION
The atmosphere
The battery should be charged in an area with adequate because it may emit explosive
gases. Be sure that there is enough space around the charger. This is important for the
air circulation, for cooling of the charger and release of gases emitted. The TBC 600 may
be used outdoors, however protect the charger against rain.
Important
Do not charge when there is a fuel leak or fuel is evaporating.
Mounting
The TBC 600 should be mounted vertically with the front side connectors facing upwards.
Important
When the charger is to be used in an aluminium or steel ship/vessel, it must be
insulated by suspension. That is, in order to avoid electrolysis, the casing of the
charger may not be in contact with the ship.
Wire thickness
You can use the formula given below to determine the correct cable thickness. If the
result of the calculation is not a standard, existing cable thickness then choose the cable
that is the closed by.
Max. current x distance x 0,2 = cable mm2
battery – charger
Example : a TBC 612-1-25 is connected to the battery on a distance of 2 meters.
25 (current) x 2 (meter) x 0,2 = 10mmq
If the result is not a standard cable thickness, then use the nearest standard cable
thickness.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq TBC 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq TBC 600 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info