684718
10
Zoom out
Zoom in
Previous page
1/18
Next page
10
E N
that in this case the total of the consumers doesn’t exceed the
maximum power of the converter.
3. If the input and output are properly connected, the converter can
be activated by means of the on/off switch. The green LED ‘power
on’ will light when the converter is ready for use.
Important
- The converter will not work (correctly) if the input voltage is
too low.
- If the converter isn’t used for a longer period of time, we
advise you to disconnect the converter from the battery.
On/off remote
All SP and SB models have the possibility to be switched on/off
remotely, for example by means of the D+ connection of the
dynamo, the ignition key or an external n/o switch.
A 6,3 mm faston terminal is located
on the output side.
Use an wire of 0,5mmq. The offered
Voltage should be between 9-30Vdc.
The converter will start operating
when the voltage is present on this wire.
If you want to use this option instead of the on/off switch, the
on/off switch should be set to theoff” position.
USB output
On the USB terminal a 5Vdc consumer can be connected. The
maximum load is 100mA.
Connecting a battery on output
A battery may be connected on the output of all the models.
However, we advise you to order the charge converter version of
the concerning converter (add LOV to the article number). This
way the converter is adapted for charging a battery.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq SP series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq SP series in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info