Manual Xenteq SP series (page 9 of 18) (English, German, Dutch)

684718

Zoom out

Zoom in

1/18

side will be the half of the output side ( input voltage doubles so

input current halves). With the SB 1120AU and SB 2210AU the

input and output currents remains almost the same.

Formula for the calculation of the optimum cable size:

Current (Amp.) x distance in meters x 0,2 = cable size in mmq

Example calculation output: de distance from a SP 1220AU to

consumers is 1,5 meters. The maximum output current that flows

through the cable is 20Amp. The formula:

20 x 1,5 x 0,2 = 6 mmq

Example calculation input: the distance from battery to a SP

1220AU is 0,5 meters. In this case the calculation should be

based on a input current of 40Amp. The formula:

40 x 0,5 x 0,2 = 4 mmq

Connection

1. Connect a red cable on the ‘DC input’ side to

the positive pole and a black cable to the

negative pole of the battery. Make sure that

the correct cable is connected to the correct

pole. The converter will become defective if

the poles are reversed. In this case the

reparation cost are not covered by the guarantee.

2. After connection to the battery the

consumers can be connected to the

‘DC output’. All converter have two

output terminals, which are internally

connected. If more consumers should be

connected, then use a manifold. Make sure

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq SP series in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xenteq SP series Manual

Product: