684723
16
Zoom out
Zoom in
Previous page
1/22
Next page
8
EN
INTRODUCTION
The battery protectors from the SBP series have been developed to
protect the battery against deep discharges. As a result, the battery
life can be guaranteed. The battery protector can also for example
ensure that there is always enough power available to start a vehicle.
The battery protector switches off the power supply to the connected
consumers at the set voltage, so that the battery cannot be
discharged further. The required disconnect voltage must be set
before use. Once the battery voltage is recharged to the acceptable
level (fixed value) through charging, the power supply is automatically
resumed. Optionally, it is possible to force the battery protector to
switch on. Read more about this in chapter 'In use', paragraph
'manual re-start'.
The battery protector is suitable for both 12Vdc and 24Vdc systems.
The correct system voltage will be determined automatically. Should
the input voltage exceed requirements, the overvoltage protection will
intervene and the output will be switched off.
In a 12Vdc system the connected consumers may not exceed
200Amp. In a 24Vdc system this is 100Amp.
INSTALLATION
The battery protector will automatically detect whether it is a 12Vdc
or 24Vdc system. It is therefore important that the battery is at a
normal voltage level at the time of connection. A battery voltage that
is too high or too low can result in the wrong selection being made.
Mount the device as close as possible to the battery and on a stable
surface.
Connect the battery to the battery protector’s input (pin 30). Connect
the load/consumers to the output (pin 87). Be mindful of the correct
polarity.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq SBP-SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq SBP-SERIES in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info