Manual Xenteq LBC 524-5S (page 22 of 58) (English, German, Dutch, French)

684580

Zoom out

Zoom in

1/58

E N

also when a full battery is connected. In the second stage, the equalize stage

(LED orange) the will be charged to 100%. The length of the charging time

depends on the battery quality, battery capacity, depth of discharge and the

current draw of any present users. Furthermore any faults could delay the

process.

If the charge process is finished, the charger will switch automatically to the

float charge (LED green) keeping the battery under continues maintenance. If

the charger is in this stage for 24 hours at a minor current, the charger will go

to its ‘jogging’ mode. This is a special charge stage for batteries that aren’t used

for a longer period of time, for instance during a winter break.

If necessary the charger will automatically return from the float charge stage or

jogging stage to the first charging stage (bulk charging).

Important

The charging process may only be stopped when it is finished, so when the

green

charging process LED lights or flashes. If the charging process is

interrupted before it is completed, the battery loses its charge and its acid

balance.

When disconnecting the battery, at interruption of the mains voltage or when

the charger is put in its stand-by function, the current charge process will stop.

When a battery is re-connected, the mains voltage is present again or when the

charger is re-activated from its stand-by function, in all cases a new charge

process will start.

When a problem is detected at the start or during the charge process, the

‘power’ LED will light up red. Advice the Trouble Shooter for the needed actions.

LiFePO4 setting

If the charger is set on the LiFePO4 setting, then the charger will follow a

special charging program for this kind of battery, including a BMS auto start

system. If the charger doesn’t detect a battery, it will send a pulse every 20

seconds to start up a potentially present BMS. During these pulses the 4

setting LED’s will light as indication.

Turning the charger on/off

With the push button ‘power/mode’ button on the front side, the charger can

be turned off. Push and hold this button for 2 seconds, the charger will turn in

its stand-by function. In this stand-by mode the “Power” LED will flash two times

every 10 seconds. During this period the charger is in its power save mode.

To re-activate the charger, the ‘power/mode’ button must be pushed shortly.

The ‘power’ LED will turn to green again. If a battery is present, a new charge

process will start directly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq LBC 524-5S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xenteq LBC 524-5S Manual

Product: