684580

Xenteq LBC 524-5S Manual

19
Zoom out
Zoom in
Previous page
1/58
Next page
19
E N
*= factory setting
The charger will leave the setup-mode if the button isn’t used for 10 seconds. In
this case the ‘ power’ LED will flash two times. The chosen setting will remain in
the memory of the charger and the setting LED lights when the charger is on.
Charger as power supply
The LBC 500S has a special setting for the use as a power supply. In this case
the charger will give one, constant voltage. The users can be connected to the
charger directly, so without intervention of a battery.
Put the charger in its set up mode, as described above. Push until all 4 setting
LED’s are out.
Important: the short circuit protection on the output will not work when the
charger is in its power supply mode.
If the charger is in its power supply function, the three charge status LED’s are
used to indicate the height of the load. This way you know how much power the
charger supplies.
LED Current LED Current
Green, flashes 0% Orange + red 61% - 80%
Green 1% - 20% Red 81% - 100%
Green + orange
21% - 40% Red, flashes > 100%
Orange 41% - 60%
OPTIONAL TEMPERATURE SENSOR T-SENSE1
Temperature-compensated charging is possible by
connecting the optional T-Sense1 temperature sensor.
If you want to use this temperature sensor, then it must first be activated. This
makes it necessary to intentionally choose whether or not to use temperature-
compensated charging, and your choice is monitored. It will prevent long periods
of unintentional erroneous charging. The applied compensation can be found in
the appendix (page 55).
AGM, CALCIUM, SPIRAL
LiFe-PO4
POWER SUPPLY
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq LBC 524-5S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq LBC 524-5S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info