684587
21
Zoom out
Zoom in
Previous page
1/38
Next page
21
EN
The battery is connected but
the charger does not work
correctly (possibly the LED’s
also show incorrect
behaviour)
Charger is set on the power
supply mode.
Change the setting, see
chapter ‘Setting the charger’.
Power LED lights red
*
.
Battery connection problem:
-
No battery present
-
Bad connection between
battery and charger
-
Reverse polarity
-
Short circuit
Check the connection to the
battery on faults.
Charger is in a thermal
stop.
The charging process will
continue automatically when
the charger has cooled down.
AC input too low.
Check the mains voltage. It
should be higher than
180VAC.
The bulk stage takes longer
than 14 hours.
The battery is damaged/
broken. Check the battery.
Heavy users present during
charge process. Shut down as
many users as possible.
The charger has insufficient
current for the concerning
battery capacity.
Hardware/software
problem.
Send the charger back to
supplier/manufacturer.
Warning for a too low
battery voltage.
Indication will light for 3 min.
The charge process will start
as usual.
Battery voltage too high.
Charge process stopped.
Check if the system voltage is
the same as the output voltage
of the charger
*
= when the ‘power’ LED lights red, it is possible to request the concerning error
by means of pushing the ‘power/mode’ button shortly. With the 4 LED’s from
‘setting’ can be read which error is ascertained (LEDs are flashing). See
overview on page 34. Advise also the explanations of the concerning section of
the chapter ‘Features’.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq LBC 524-10XTR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq LBC 524-10XTR in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info