656559

Xeecom ApS W193-R Manual

3
Zoom out
Zoom in
Previous page
1/6
Next page
IMPORTANT: For best transmission distance, look for a location where the rain gauge can be
placed 1 meter or more above ground level.
- in an area not blocked on the top or sides, so rain can freely reach the rain gauge (for example,
not under an overhang or too close to a building or fence)
Cautions:
- To prevent false rainfall readings caused by water splashes, do not choose a location that is not
level or that is too close to the ground, a swimming pool, lawn sprinklers, or anywhere water
might accumulate or run off.
- The screen on the cylinder of the rain gauge filters most debris (such as leaves) that might fall
into the rain gauge. To avoid frequent build-up of debris in the cylinder, do not mount the rain
gauge too close to the trees or plants
2. Battery Installation for the rain gauge
- Press the tabs back as indicated below to unlock the rain gauge cover
- Lift the rain gauge cover off its base. Then carefully remove the packing tape from the bucket
assembly
- Open battery cover and insert 2 pieces of AA batteries according to the polarity indicated. Close
the battery cover
- Replace & lock the rain gauge cover on the base
3. Testing the effective transmission range & setting up the RF connection
- Shortly after the battery installation of the rain gauge, press and hold [RAIN SEARCH] button on
the main unit for 3 seconds to search for RF signal from the remote rain gauge.
- The rainfall reading “- - - -“ will flash and the main unit is now searching for remote rain gauge.
Daily rainfall reading (in this case “0” mm or inch) will appear within 3 minutes if the RF
transmission is successful and the main unit & rain gauge are now within the effective
transmission range.
- If daily rainfall “- - - - “ stop flashing and stay on the display after 3 minutes of searching, the RF
transmission is failed. Shorten the distance between the main unit & rain gauge if necessary.
Downloaded from www.Manualslib.com manuals search engine
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xeecom ApS W193-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xeecom ApS W193-R in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info