608010

Xavax 111850 Radiator Thermostat Manual

12
Zoom out
Zoom in
Previous page
1/35
Next page
22 23
Step 3: Installing the energy-saving controller
The actuator can be installed on all standard heating
valves. There is no need to drain away water or ddle
around with the heating system before doing this. First,
you need to remove the old thermostat dial:
• Turn the thermostat dial anti-
clockwise as far as it will go (A).
• Release the thermal ring of the
thermostat (B).
• Remove the thermostat from
the valve (C).
An adapter will need to be used
in the case of certain valves.
Adapters for Danfoss valves (RA, RAV, RAVL) are inclu-
ded in the scope of delivery. For details, please refer to
the adapter overview (see 18).
• The adapter must be placed on
the valve and turned until it is
securely seated.
• In the case of the RAV adapter,
the extension supplied must be
attached to the valve tappet.
• The RA and RAV adapters
must, in addition, be secured
by means of the bolt and nut
supplied.
The energy-saving controller can only be installed if “INS”
is showing on the display. Following installation, the ac-
tuator will perform an adjustment run so that it can adapt
to the valve. During this process, “ADA” will be displayed.
• Place the actuator on the valve.
• Tighten the union nut.
• “INS” will appear on the display, press the OK button.
• The actuator will perform an adjustment run (“ADA” will
appear on the display, operation not possible).
• After that, the actuator will be ready for operation (Auto
mode).
If the adjustment run was initiated prior to installa-
tion, or if an error message will be displayed (F1, F2,
F3); press OK to move the motor back to the “INS”
position.
1. Setting the weekly program
The weekly program allows you to set up to 3 separate
heating periods (7 switching times) for each day of the
week. Programming is performed in relation to the se-
lected days, for which temperatures must be stored for a
period from 00:00 to 23:59.
Press and hold down the menu button for more than 3 seconds.
• “PRO” will appear on the display.
• Conrm with OK.
• “DAY” will appear on the display. The setting wheel can
be used to select an individual day of the week, all wor-
king days, the weekend or the entire week (example
shows working days selected).
• Conrm with OK.
• The rst setting time will appear on
the display (0:00). This cannot be
changed. In addition, the display
shows bars for every other swit-
ching interval.
• Conrm with OK.
• Set the temperature that is to be
maintained from 0:00 onwards (ex-
ample shows 17.0°C).
• Conrm with OK.
ded in the scope of delivery. For details, please refer to
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xavax 111850 Radiator Thermostat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xavax 111850 Radiator Thermostat in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info