608010

Xavax 111850 Radiator Thermostat Manual

11
Zoom out
Zoom in
Previous page
1/35
Next page
20 21
II. General function
This energy-saving controller for radiators can be used to
control room temperature on the basis of time. The actuator moves
a valve, thereby allowing the amount of heat owing to the heat-
ing appliance to be controlled. The controller is compatible with all
standard heating appliance valves.
Installation can be achieved in 3 easy steps.
Step 1: Inserting (replacing) the batteries
• Remove the battery com-
partment cover.
• Insert 2 new LR6 batter-
ies (Mignon / AA) into the
battery compartment, en-
suring they are the right
way round.
• Reattach the battery com-
partment cover and click
into place.
New alkaline batteries have a life of approximately 3 years.
A battery symbol (
) will indicate when the batteries
need to be replaced. After removing the old batteries,
please wait approximately 1 minute before inserting the
new ones. This device does not support operation with
rechargeable batteries.
Never recharge standard batteries.
Doing so will present a risk of explosion.
Do not throw the batteries into a re.
Do not short-circuit batteries.
Used batteries should not be disposed
of with regular domestic waste. Instead,
they should be taken to your local battery
disposal point.
Step 2: Setting the date and time of day
The rmware version number will be displayed briey once
you have inserted/replaced the batteries and then you will
be automatically prompted to set the date and time of day.
• Use the setting wheel (B) to set
the year (A).
• Conrm with OK (C).
• Use the setting wheel (B) to set
the month (A).
• Conrm with OK (C).
• Use the setting wheel (B) to set
the day (A).
• Conrm with OK (C).
• Use the setting wheel (B) to set
the hour (A).
• Conrm with OK (C).
• Use the setting wheel (B) to set
the minute (A).
• Conrm with OK (C).
The motor will start moving back the control pin while the
entries are still being made.
• If “INS” is displayed with a rotating “
∏
” symbol, this
indicates that the motor is still moving back. Once the
device is ready for the actuator to be installed on the
valve, just “INS” will appear on the display.
• The weekly program and other settings can be cus-
tomisedprior to installation.To dothis,pressthe menu
button when “INS” is shown on the display. For further
details, please see “4. Conguration menu”.
• Onceprogrammingiscomplete, “INS”willreappear onthe
display and installation (Step 3) can commence.
A
CB
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xavax 111850 Radiator Thermostat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xavax 111850 Radiator Thermostat in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info