575092
8
Zoom out
Zoom in
Previous page
1/84
Next page
Random orbital sander EN
8
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
SYMBOLS OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for dry sanding of
wood, plastic, metal and filler material as well
as painted surfaces. Machines with electronic
control are also suitable for polishing.
ASSEMBLY THE ROTARY
SANDER
1. REPLACING THE SANDING PLATE
(See Fig A)
To replace the sanding plate, pull off the Sand
paper. Loosen and remove the screw.
Replace damaged sanding plates without
delay.
2. REPLACING THE SAND PAPER
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
A) Selecting the sand paper
Depending on the material to be worked and
the desired material removal, various Sand
paper qualities are to be used:
- Use coarse grits to sand down rough finishes
medium grit to smooth the work and fine grit
to finish off.
- The higher the grade number, the finer the
grit. For rough work, start with a low grade of
grit. (e.g.60grit) and change to a higher, finer
grade (e.g.120grit) for finishing.
B) Replacing the sand paper (See Fig B)
Lift the Sand paper at the side and pull it off
the sanding plate. Clean the sanding plate, if
required. Press the new Sand paper against
the bottom of the sanding plate. To ensure
optimum dust extraction, the holes of the
Sand paper must match with those of the
sanding plate.
OPERATION
1. SWITCHING ON/OFF (See Fig C)
Depress “” on the sliding on-off switch to
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX653 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX653 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info