575092

Worx WX653 Manual

9
Zoom out
Zoom in
Previous page
1/84
Next page
Random orbital sander EN
9
start the machine.
Depress “0” on the sliding on-off switch to
stop it.
2. VARIABLE SPEED CONTROL
(See Fig D)
With the variable speed control dial (7), the
required speed can be selected (also while
running).
The required speed is dependent on the
material and is to be determined by a practical
trial.
After longer periods of working at low speed,
allow the machine to cool down by running it
for approx. 3 minutes at maximum speed with
no load.
Sanding
work
Grain
Speed
setting(opm)
Coarse
sanding
Precision
sanding
Sanding
down
varnishes
180 400 8700~11000
Stripping
paint
40 120 9800~11000
Touching
up
paintwork
120 120 7600~10000
Sanding
wood
60 240 7600~11000
Machining
veneer
180 400 8700~11000
Sanding
aluminium
80 240 7600~11000
Derusting
metal
40 120 9800~11000
Sanding
metal and
steel
120 240 9800~11000
Sanding
plexiglass
180 400 6500~8700
3. DUST BOX (See Fig E, F)
A) Attach the dust box (See Fig E)
Your sander is equipped with a dust collection
box. To attach, slide the dust box onto the
outlet piece and take care that the dust box
locks in the grooves of the outlet.
CAUTION: To prevent the possibility
of sanding dust or foreign body being
thrown into your face or eyes, never attempt
to use your sander without the dust box
properly installed.
B) Empty dust box (See Fig F)
For more efficient operation, empty dust box
every 5-10mins. This will permit the air to flow
through the box better. To empty the dust box,
pull off the dust box out of the dust extraction
outlet directly and shake out dust.
4. USING THE DUST EXTRACTION
ADAPTER (See Fig G)
Your sander is equipped with two dust
extraction adapters, which are designed for
connecting the hose of a vacuum cleaner.
If the vacuum hose is 35mm, Insert the 35mm
dust adapter (a) directly into the rear dust
outlet of sander. If the vacuum hose is 32 mm,
insert the 32 mm adapter (b) into the back of
35mm adapter (a).
NOTE: Please pull the dust adapter to make
sure tightened securely on the dust outlet.
5. SANDING SURFACES
Place the machine with the complete Sand
paper on the surface to be worked. Ensure
uniform sanding pressure. Less sanding
pressure increases the sanding capacity and
protects the machine and the sanding tool.
The removal capacity and the sanding pattern
are determined mainly by the selection of
the Sand paper (grain size), the speed of the
sanding plate and the application pressure.
ROUGH SANDING
Attach a Sand paper with coarse grain.
Apply only light sanding pressure to achieve
increased material removal.
FINE SANDING
Attach a Sand paper with fine grain. With
moderate pressure, move the machine in a
circular pattern or alternately in lengthwise
and crosswise directions over the work piece.
Do not tilt the machine to avoid sanding
through the work piece (e.g. when sanding
veneer). After finishing the work, switch off the
machine and lift it from the work piece.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX653 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX653 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info