575091

Worx WX646.1 Manual

6
Zoom out
Zoom in
Previous page
1/76
Next page
Palm sander EN
76 PB7
SYMBOLS OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for dry sanding of
wood, plastic, filler and coated surfaces.
1. FITTING THE SANDING PAPER
(See Fig. A)
Fit the paper over the pad so that it covers
the entire area. Make sure the sanding paper
is even with the edges and that the dust
collection holes in the pad and sanding paper
is aligned and the sanding paper evenly
overlaps the pad. Never use your sander
without a sanding paper.
2. USING THE DUST ADAPTER (See Fig. B)
Your sander is equipped with a dust adapter,
which is designed for collecting dust task.
Insert the dust adapter into the rear dust outlet
of sander. Then pull the dust adapter and
make sure it is tightened securely on the dust
outlet. Then connect the hose of a vacuum
cleaner. First please turn on the vacuum
cleaner, then turn on the sander. If you stop
sanding, first turn off the sander, then turn off
your vacuum cleaner.
3. ON/OFF SWITCH
To start your sander, depress the protective
cover over the switch at the position
marked“I”. To stop your sander, depress the
protective cover at the position marked “0”.
4. FLUSH SANDING FACILITY
Your sander can sand flush on three sides of
the base-plate which allows easy access to
corners and edges of moulding.
5. ORBITAL SANDING
Your sander operates in small circular rotations
which allows efficient material removal.
Operate your sander in long sweeping
movements across your workpiece and even
across the grain. For a finer finish, always use
a fine grain sandpaper and only move the
sander in the direction of the grain and never
across the grain.
To reduce the risk of injury, user
must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products should
not be disposed of with household
waste. Please recycle where facilities
exist. Check with your Local Authority
or retailer for recycling advice.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX646.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX646.1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info