Manual Worx WX572 BLADERUNNER (page 12 of 88) (English, German, Dutch, French, Italian, Polish, Spanish)

575060

Zoom out

Zoom in

1/88

BladeRunner

X2 EN

ADDITIONAL SAFETY

INSTRUCTIONS FOR YOUR

BLADE RUNNER

1. SAFETY PRECAUTION

1) Do not use saw blades which are damaged

or deformed;

2) Replace the table insert when worn;

3) Connect blade runner to a dust-collecting

device when sawing wood;

4) Take care that the selection of the saw

blade and the speed depends on the

material to be cut;

5) Do not clean the saw blade whilst it is in

motion;

6) Wear suitable personal protective

equipment, when necessary, this could

include:

– hearing protection to reduce the risk of

induced hearing loss;

– respiratory protection to reduce the risk of

inhalation of harmful dust;

– gloves for handling the saw blade and

rough material.

2. SAFE OPERATION

1) During transportation the saw blade guard

should be locked at fully down (close to the

table) position;

2) Do not use guard and its support system

for handling or transportation;

3) When cutting round timber use a suitable

holding device to prevent twisting of the

workpiece;

4) Any time after cutting, the knob for locking

blade guard shall be released so that the

guard is fully down to the table.

5) The thickness of cutting material cannot

exceed the recommended maximum

thickness. This tool cannot be used for

cutting glass or mesh wire.

To reduce the risk of injury, user

must read instruction manual

Double insulation

Wear ear protection

Wear eye protection

Warning: do not expose to rain or

use in damp locations

Before any work on the machine

itself, pull the power plug from the

outlet

Wear protective gloves

Wood

Aluminium

Metal

Plastic

Ceramic tile

Teeth per inch

SYMBOLS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX572 BLADERUNNER in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX572 BLADERUNNER Manual

Product: