Manual Worx WX570 BLADERUNNER (page 15 of 143) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

575088

Zoom out

Zoom in

1/143

Multi-function saw EN

slots clean. Keep all working controls free of

dust. If you see some sparks ﬂashing in the

ventilation slots, this is normal and will not

damage your power tool.

If the supply cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarly qualiﬁed persons in order to

avoid a hazard.

WARNING: When not in use,

slacken the guard arm clamp knob

(9) to make the pressure foot fully down

to the table (See Fig. P). This will prevent

injury from the saw blade.

To insure proper operation and extend tool

life, prevent dust from accumulating under the

table insert (13).

1. Be sure to use a vacuum or dust extractor

for dusty cutting operations such as

ceramic tile. (See Fig. Q)

2. If dust accumulates, remove the table insert

by lifting the latch (e). (See Fig. R)

3. Vacuum out the dust in and around the

blade holder. (See Fig. S)

4. Reattach the table insert securely.

ENVIRONMENTAL

PROTECTION

This product has been marked with a

symbol relating to removing electric

and electronic waste. This means

that this product shall not be discarded with

household waste but that it shall be returned

to a collection system which conforms to the

European Directive 2002/96/CE. It will then

be recycled or dismantled in order to reduce

the impact on the environment. Electric and

electronic equipment can be hazardous for the

environment and for human health since they

contain hazardous substances.

PLUG REPLACEMENT (UK &

IRELAND ONLY)

If you need to replace the ﬁtted plug then

follow the instructions below.

IMPORTANT

The wires in the mains lead are colored in

accordance with the following code:

Blue = Neutral

Brown = Live

As the colors of the wires in the mains lead of

this appliance may not correspond with the

coloured markings identifying the terminals in

your plug, proceed as follows. The wire which

is coloured

blue must be connected to the terminal which

is marked with N. The wire which is coloured

brown must be connected to the terminal

which is marked with L.

WARNING: Never connect live or

neutral wires to the earth terminal of the

plug. Only ﬁt an approved BS1363/A plug and

the correct rated fuse.

NOTE: If a moulded plug is ﬁtted and has to

be removed take great care in disposing of the

plug and severed cable, it must be destroyed

to prevent engaging into a socket.

Connect

Blue to N

(neutral)

Outer sleeve

firmly clamped

Cable grip

Brown L (live)

13 Amp fuse approved

to BS1362

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX570 BLADERUNNER in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX570 BLADERUNNER Manual

Product: