575077
10
Zoom out
Zoom in
Previous page
1/104
Next page
12V Li-Ion multi-purposed saw EN
1110
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water
Do not burn
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point
This product has been marked
with a symbol relating to removing
electric and electronic waste. This
means that this product shall not
be discarded with household waste
but that it shall be returned to a
collection system which conforms to
the European Directive 2002/96/CE.
It will then be recycled or dismantled
in order to reduce the impact on the
environment. Electric and electronic
equipment can be hazardous for
the environment and for human
health since they contain hazardous
substances.
SYMBOLS OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is 2 saws in 1 tool with rep saw
and jig saw function, intended for sawing
wood, plastic, metal and building materials
while resting firmly on the workpiece. It is
suitable for straight and curved cuts.
CHARGING PROCEDURE
1. CHARGING YOUR BATTERY PACK
WARNING!
The charger and battery pack are
specifically designed to work together so do
not attempt to use any other devices. Never
insert or allow metallic objects into your
charger or battery pack connections because
an electrical failure and hazard will occur.
2. BEFORE USING YOUR CORDLESS
TOOL
Your battery pack is UNCHARGED and you
must charge once before use. When you
charge the new battery or one which has not
been used for long periods of time, it may
not reach full charge until after you have
discharged it fully in use and recharged it
several times.
3.1. HOW TO CHARGE YOUR BATTERY
PACK (WX540 WX540.9) (See Fig. A1)
Connect the battery charger (13) to the power
supply and the green light (14) will illuminate.
Slide the battery pack (12) into the charger
base to make the connections. And the red
light (14) will illuminate to show charging has
started.
After charging approx 3-5hours, the red light
will switch to green, which means the battery
is full, and charging is completed.
3.2. CHARGING PROCEDURE (WX540.3)
(See Fig. A2)
1) Plug the charger into an appropriate outlet.
The light (a) will be green.
2) Insert the battery pack into the charger, the
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX540.9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX540.9 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info