575058

Worx WX523 Manual

11
Zoom out
Zoom in
Previous page
1/19
Next page
20V WORX saw EN
11
Large panels tend to sag under their own
weight. Supports must be placed under
the panel on both sides, near the line of cut
and near the edge of the panel.
e) Do not use dull or damaged blades.
Unsharpened or improperly set blades
produce narrow kerf causing excessive
friction, blade binding and kickback.
f) Blade depth and bevel adjusting
locking levers must be tight and
secure before making cut. If blade
adjustment shifts while cutting, it may
cause binding and kickback.
g) Use extra caution when making a
“plunge cut” into existing walls or
other blind areas. The protruding blade
may cut objects that can cause kickback.
SAFETY INSTRUCTIONS
FOR PLUNGE TYPE SAW
GUARD FUNCTION
a) Check guard for proper closing before
each use. Do not operate the saw
if guard does not move freely and
enclose the blade instantly. Never
clamp or tie the guard with the blade
exposed. If saw is accidentally dropped,
guard may be bent. Check to make sure
that guard moves freely and does not touch
the blade or any other part, in all angles
and depths of cut.
b) Check the operation and condition of
the guard return spring. If the guard
and the spring are not operating
properly, they must be serviced
before use. Guard may operate sluggishly
due to damaged parts, gummy deposits, or
a build-up of debris.
c) Assure that the base plate of the saw will
not shift while performing the “plunge
cut” when the blade bevel setting is not
at 90°. Blade shifting sideways will cause
binding and likely kick back.
d) Always observe that the guard is
covering the blade before placing
saw down on bench or floor. An
unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is
in its path. Be aware of the time it takes for
the blade to stop after switch is released.
ADDITIONAL SAFETY
RULES FOR YOUR
CIRCULAR SAW
1) Always wear a dust mask, hearing
protection and eye protection.
2) Only use saw blades recommended in the
specification.
3) Do not use any abrasive wheels.
4) Use only blade diameter(s) in accordance
with the markings.
SAFETY INSTRUCTIONS
FOR BATTERY PACK
a) Do not dismantle, open or shred secondary
cells or battery pack.
b) Do not expose cells or battery pack to heat
or fire. Avoid storage in direct sunlight.
c) Do not short-circuit a cell or a battery
pack. Do not store cells or battery pack
haphazardly in a box or drawer where they
may short-circuit each other or be short-
circuited by other metal objects.
d) Do not remove a cell or battery from its
original battery pack enclosure required for
use.
e) Do not subject cells or battery pack to
mechanical shock.
f) In the event of a cell leaking, do not allow
the liquid to come in contact with the skin
or eyes. If contact has been made, wash
the affected area with copious amounts of
water and seek medical advice.
g) Do not use any charger other than that
specifically provided for use with the
equipment.
h) Observe the plus (+) and minus (–) marks
on the cell, battery and equipment and
ensure correct use.
i) Do not use any cell or battery pack which is
not designed for use with the equipment.
j) Do not mix cells of different manufacture,
capacity, size or type within a device.
k) Keep cells and battery pack out of the reach
of children.
l) Seek medical advice immediately if a cell or
a battery pack has been swallowed.
m) Always purchase the correct cell or battery
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX523 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX523 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info