Manual Worx WX445.1 (page 11 of 136) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

575068

Zoom out

Zoom in

1/136

Circular saw with laser EN

OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the

instruction book carefully.

INTENDED USE:

The machine is intended for lengthways

and crossways cutting of wood with straight

cutting lines as well as bevel angles to 51°

while resting ﬁrmly on the work piece.

1. DEPTH OF CUT ADJUSTMENT

(See Fig. A)

Lift the depth of cut lock lever and raise the

saw body away from the base plate. Set the

depth of cut with the scale and push the lever

down to lock. Always add 3mm to your depth

of cut so that the blade can cut through the

material.

2. BASE PLATE ANGLE ADJUSTMENT

(See Fig. B1 & B2)

Turn the base plate bevel lock (6) in anti-

clockwise direction to loosen the angle scale.

Tilt the base plate away from the machine until

the required cutting angle is adjusted on the

angle scale (5). Tighten the bevel lock (6) by

turning it in clockwise direction.

USING THE CIRCULAR SAW

1. SAFETY ON/OFF SWITCH (See Fig. C)

Your switch is locked off to prevent accidental

starting. Depress the lock off button then the

on/off switch and release the lock off button.

Your switch is now on. To switch off, just

release the on/off switch. You can depress the

lock-off button from either side of the button.

2. PARALLEL GUIDE ADJUSTMENT

(See Fig. D)

It is used for making cuts parallel to a

workpiece edge at a chosen distance. Slide

the parallel guide arm through the ﬁxture to

achieve the required cutting distance then

tighten the lock knob to clamp. It can be used

from both sides of the base plate. For straight

cuts, use the 0° guide mark to align with your

parallel guide scale. For a 45° bevel cut, use

the 45° guide mark to align with your parallel

guide scale. Securely clamp the parallel guide.

NOTE: It is best to carry out a trial cut.

3. CHANGING THE SAW BLADE

(See Fig. E, F, G)

• Before any work on the machine itself,

pull the mains plug.

• Wear protective gloves when

mounting the saw blade. Danger of

injury when touching the saw blade.

• Only use saw blades that correspond

with the characteristic data given in

the operating instructions.

• Do not under any circumstances use

grinding discs as the cutting tool.

For changing the cutting tool, it is best to place

the machine on the face side of the motor

housing.

REMOVING

Press the spindle lock button (10) and keep it

depressed.

 The spindle lock button (10) may be

actuated only when the saw blade is at a

standstill.

Loosen the blade bolt (15) with the hex key

(20). Remove the outer ﬂange (12). Tilt back the

lower blade guard (13) and hold it ﬁrmly with

the lower guard lever (16). Remove the saw

blade (14).

MOUNTING

Clean the saw blade and all the clamping parts

to be assembled. Tilt back the lower blade

guard (13) and hold it ﬁrmly with the lower

guard lever (16). Place the saw blade onto the

inner ﬂange (22). Assemble the outer ﬂange

(12) and the blade bolt (15). Use the hex key

(20) to tighten the bolt (15) with 1/4 turn, more

than ﬁnger tight.

• Take care that the mounting positions

of the inner ﬂange (22) and outer

ﬂange (12) are correct.

• When mounting: Ensure that the

cutting direction of the teeth

(direction of arrow on saw blade) and

the direction-of-rotation arrow on the

blade guard match.

4. DUST/CHIP EXTRACTION (See Fig. H)

Fasten the vacuum adapter (17) onto the dust

extraction outlet until it latches. Additionally

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX445.1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX445.1 Manual

Product: