Manual Worx WX445.1 (page 9 of 136) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

575068

Zoom out

Zoom in

1/136

Circular saw with laser EN

Unsharpened or improperly set blades

produce narrow kerf causing excessive

friction, blade binding and kickback.

f) Blade depth and bevel adjusting

locking levers must be tight and

secure before making cut. If blade

adjustment shifts while cutting, it may

cause binding and kickback.

g) Use extra caution when making a

“plunge cut” into existing walls or

other blind areas. The protruding blade

may cut objects that can cause kickback.

SAFETY INSTRUCTIONS

FOR SAWS WITH INNER

PENDULUM GUARD

LOWER GUARD FUNCTION

a) Check lower guard for proper closing

before each use. Do not operate the

saw if lower guard does not move

freely and close instantly. Never clamp

or tie the lower guard into the open

position. If saw is accidentally dropped,

lower guard may be bent. Raise the lower

guard with the retracting handle and make

sure it moves freely and does not touch the

blade or any other part, in all angles and

depths of cut.

b) Check the operation of the lower

guard spring. If the guard and the

spring are not operating properly,

they must be serviced before use.

Lower guard may operate sluggishly due

to damaged parts, gummy deposits, or a

build-up of debris.

c) Lower guard may be retracted

manually only for special cuts such

as “plunge cuts” and”compound

cuts.” Raise lower guard by retracting

handle and as soon as blade enters

the material, the lower guard must be

released. For all other sawing, the lower

guard should operate automatically.

d) Always observe that the lower guard

is covering the blade before placing

saw down on bench or ﬂoor. An

unprotected, coasting blade will cause the

saw to walk backwards, cutting whatever is

in its path. Be aware of the time it takes for

the blade to stop after switch is released.

ADDITIONAL SAFETY

RULES FOR CIRCULAR SAW

1. Always wear a dust mask, hearing

protection and eye protection.

2. Only use saw blades recommended in the

speciﬁcation.

3. Do not use any abrasive wheels.

4. Use only blade diameter(s) in accordance

with the markings.

GENERAL SAFETY

WARNINGS FOR YOUR

LASER

WARNING: Read all safety warnings

and all instructions. Failure to follow

the warnings and instructions may result in

serious injury.

Save all warnings and instructions for

future reference.

These lasers do not normally present an

optical hazard although staring at the beam

may cause ﬂash blindness.

Do not stare directly at the laser beam. A

hazard may exist if you deliberately stare into

the beam, please observe all safety rules as

follows:

1. The laser shall be used and maintained

in accordance with the manufacturer’s

instructions.

2. Never aim the beam at any person or an

object other than the work piece.

3. The laser beam shall not be deliberately

aimed at another person and shall be

prevented from being directed towards

the eye of a person for longer than 0.25

seconds area.

4. Always ensure the laser beam is aimed

at a sturdy work piece without reﬂective

surfaces, e.g. wood or rough-coated

surfaces are acceptable. Bright shiny

reﬂective sheet steel or similar is not

suitable for laser applications as the

reﬂective surface may direct the laser beam

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX445.1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX445.1 Manual

Product: