Manual Worx WX372 (page 9 of 96) (English, German, Dutch, French, Italian, Polish, Spanish)

575018

Zoom out

Zoom in

1/96

Lithium-Ion cordless hammer drill EN

SYMBOLS OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the

instruction book carefully.

INTENDED USE

The machine is intended for driving in and

loosening screws as well as for drilling in

wood, metal and plastic.

BEFORE PUTTING INTO OPERATION

- BATTERY CHARGING

A battery that is new or has not been used

for a longer period does not develop its

full capacity until after several charging /

discharging cycles.

A signiﬁcantly reduced working period after

charging indicates that the batteries are used

and must be replaced.

- TO REMOVE OR INSTALL BATTERY

PACK (See Fig.A)

Depress the Battery Pack Release Button (7) to

release and slide the Battery Pack (6) out from

your tool. After recharge, slide it back into your

tool. A simple push and slight pressure will be

sufﬁcient.

1. ON / OFF SWITCH (See Fig.B)

Depress On/Off Switch (9) to start and release

it to stop your drill. The On/Off Switch is ﬁtted

with a brake function which stops your chuck

immediately when you quickly release the

switch.

It is also a variable speed switch that delivers

higher speed and torque with increased

trigger pressure. Speed is controlled by the

amount of switch trigger depression.

WARNING: Do not operate for

long periods at low speed because

excess heat will be produced internally.

2. SWITCH LOCK (See Fig.B)

The switch trigger can be locked in the OFF

position. This helps to reduce the possibility of

accidental starting when not in use. To lock the

switch trigger, place the Rotation Control (4) in

the center position.

3. REVERSIBLE (See Fig.B)

For drilling and screw driving use forward

rotation marked “ ” (lever is moved to the

To reduce the risk of injury, user

must read instruction manual

Warning

Wear eye protection

Wear ear protection

Wear dust mask

Do not expose to rain or water

Do not burn

Do not dispose of batteries. Return

exhausted batteries to your local

collection or recycling point.

This product has been marked

with a symbol relating to removing

electric and electronic waste. This

means that this product shall not

be discarded with household waste

but that it shall be returned to a

collection system which conforms

to the European Directive 2002/96/

CE. It will then be recycled or

dismantled in order to reduce the

impact on the environment. Electric

and electronic equipment can be

hazardous for the environment

and for human health since they

contain hazardous substances.

Li-Ion

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX372 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX372 Manual

Product: