Manual Worx WX312 (page 10 of 84) (English, German, Dutch, French, Italian, Polish, Spanish)

575023

Zoom out

Zoom in

1/84

Impact drill EN

1110

carbide drill bits should always be used for

drilling masonry, concrete etc with a high

speed.

2. Drilling steel

Select the drill/impact action selector switch

to the “drill symbol” position. HSS drill bits

should always be used for drilling steel with a

lower speed.

3. Pilot holes

When drilling a large hole in tough material

(i.e. steel), we recommend drilling a small

pilot hole ﬁrst before using a large drill bit.

4. Drilling tiles

Select the drill/impact action selector switch

to the “drill symbol” position to drill the tile.

When tile has been penetrated, switch over to

“hammer symbol” position.

5. Cool the motor

If your power tool becomes too hot, set the

speed to maximum and run no load for 2-3

minutes to cool the motor.

MAINTENANCE

Remove the plug from the socket before

carrying out any adjustment, servicing or

maintenance.

Your power tool requires no additional

lubrication or maintenance.

There are no user serviceable parts in your

power tool. Never use water or chemical

cleaners to clean your power tool. Wipe clean

with a dry cloth. Always store your power tool

in a dry place. Keep the motor ventilation slots

clean. Keep all working controls free of dust.

Occasionally you may see sparks through the

ventilation slots. This is normal and will not

damage your power tool.

If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly

qualiﬁed persons in order to avoid a hazard.

If the replacement of the supply cord is

necessary, this has to be done by the

manufacturer or his agent in order to avoid a

safety hazard.

TROUBLESHOOTING

1. If your power tool does not start, check the

plug on the power supply ﬁrst.

2. If the drill doesn’t work properly, check the

drill bit for sharpness, replace drill bit if worn.

Check that the drill is set to forward rotation

for normal use.

3. If a fault can not be rectiﬁed, return the tool

to an authorized dealer for repair.

ENVIRONMENTAL

PROTECTION

This product has been marked with a

symbol relating to removing electric

and electronic waste. This means

that this product shall not be discarded with

household waste but that it shall be returned

to a collection system which conforms to the

European Directive 2002/96/CE. It will then

be recycled or dismantled in order to reduce

the impact on the environment. Electric and

electronic equipment can be hazardous for the

environment and for human health since they

contain hazardous substances.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX312 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX312 Manual

Product: