575025
13
Zoom out
Zoom in
Previous page
1/104
Next page
13
automatically when the cover is opened. (See Fig. D).
NOTE:
1. Only 25mm hex shank Bits are compatible with the
screwdriver.
2. If the Cover is not open fully, the Bit Cartridge will
get stuck when taking it out from the tool. Pull the
cover all the way back.
3. The Cover may not fully close if the Bit Cartridge
is not properly aligned inside. Make sure the Bit
Cartridge has clicked into place when selecting the
desired Bit to use. If the cover cannot properly close,
just turn the Cartridge clockwise or counter-clockwise
a little Bit and try again.
3. SWITCH LOCK
The On/off Switch can be locked in the OFF position. This
helps to reduce the possibility of accidental starting when
the screwdriver is not in use. To lock the On/off Switch,
place the Forward/Reverse Rotation Control in the center
position.
4. FORWARD/REVERSE ROTATION CONTROL (See
Fig. E1, E2)
For drilling and screw driving in a clockwise rotation,
move the switch marked
” lever to the left. For
reverse rotation, move the switch marked “
” lever to
the right.
WARNING: Never change the direction of
rotation when the Chuck is rotating, wait
until it has stopped!
5. FULLY AUTOMATIC SPINDLE LOCKING (AUTO-
LOCK) (See Fig. F)
The screwdriver Chuck (6) is locked when the On/Off
Switch (4) is not pressed.
This allows the driver to be used manually when needed.
IMPORTANT:
When using as a manual tool, do not press the On/Off
Switch (4). Otherwise the screwdriver will be damaged.
6. USING THE LED LIGHT
To turn on the light simply press the On/Off Switch. When
you release the On/Off Switch, the light will go off.
LED light increases visibility and is great for dark or
enclosed areas.
7. PROTECTION AGAINST DEEP DISCHARGING
The Li-Ion battery is protected against deep discharging
by the “Discharging Protection System”. When the battery
is empty, the machine is switched off by means of a
protective circuit. The Chuck no longer rotates. When this
occurs, recharge the battery.
MAINTENANCE
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth. Always store
your power tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation
slots. This is normal and will not damage your power tool.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX254 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info