Manual Worx WX23AG.1 (page 11 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

575104

Zoom out

Zoom in

1/156

Angle grinder EN

1110

the possibility of wheel breakage. Flanges

for cut-off wheels may be different from

grinding wheel ﬂanges.

f) Do not use worn down wheels from

larger power tools. Wheel intended for

larger power tool is not suitable for the

higher speed of a smaller tool and may

burst.

ADDITIONAL SAFETY INSTRUCTIONS

FOR CUTTING-OFF OPERATIONS

Additional Safety Warnings Speciﬁc for

Abrasive Cutting-Off Operations:

a) Do not “jam” the cut-off wheel or

apply excessive pressure. Do not

attempt to make an excessive depth

of cut. Overstressing the wheel increases

the loading and susceptibility to twisting

or binding of the wheel in the cut and the

possibility of kickback or wheel breakage.

b) Do not position your body in line with

and behind the rotating wheel. When

the wheel, at the point of operation, is

moving away from your body, the possible

kickback may propel the spinning wheel

and the power tool directly at you.

c) When wheel is binding or when

interrupting a cut for any reason,

switch off the power tool and hold the

power tool motionless until the wheel

comes to a complete stop. Never

attempt to remove the cut-off wheel

from the cut while the wheel is in

motion otherwise kickback may occur.

Investigate and take corrective action to

eliminate the cause of wheel binding.

d) Do not restart the cutting operation

in the workpiece. Let the wheel reach

full speed and carefully reenter the

cut. The wheel may bind, walk up or

kickback if the power tool is restarted in the

workpiece.

e) Support panels or any oversized

workpiece to minimize the risk of

wheel pinching and kickback. Large

workpieces tend to sag under their own

weight. Supports must be placed under the

workpiece near the line of cut and near the

edge of the workpiece on both sides of the

wheel.

f) Use extra caution when making a

“pocket cut” into existing walls or

other blind areas. The protruding wheel

may cut gas or water pipes, electrical

wiring or objects that can cause kickback.

SYMBOLS

To reduce the risk of injury, user

must read instruction manual

Warning

Double insulation

Wear eye protection

Wear ear protection

Wear dust mask

Waste electrical products should

not be disposed of with household

waste. Please recycle where

facilities exist. Check with your

local authority or retailer for

recycling advice.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX23AG.1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX23AG.1 Manual

Product: