Manual Worx WR102 SI (page 12 of 19) (English)

723918

Zoom out

Zoom in

1/19

Before pegging the boundary wire, it is recommended to use a normal lawn mower or a grass trimmer to cut the

grass along the boundary. Then the wire can be laid as close as possible to the ground to prevent your Landroid

accidentally cutting the wire. The boundary wire is powered with a very low voltage totally safe to humans and pets.

2. Pegging Your Boundary Wire

NOTE: Keep the boundary wire straight and tight between the

pegs. There should be no slack wire between the pegs.

When laying the boundary

wire, use the distance

gauge to keep a 26cm*

space between the wire and

the perimeter.

Each wire peg should be

placed around 75cm apart.

Use the provided distance

gauge to ensure proper

installation.

NOTE: The maximum

permitted length for the

boundary wire is 250m.

2.1

75cm

Bonjoiur.
Nous avons une tondeuse worx 102 SI laquel n'a jamais donné total satisfaction mais...
Actuellemnt elle tond en marche Ar parfois va en Av, ne fais plus la pelouse de façon complete...
Un des noteur se bloque lorsque actionne celui-ci a la main. Que puis-je faire pour la rementre en ordre.
Submitted on 19-4-2022 at 07:17
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR102 SI in the language / languages: English as an attachment in your email.

The manual is 15,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR102 SI

Worx WR102 SI User Manual - English - 20 pages

Worx WR102 SI Installation Guide - Dutch - 19 pages

Worx WR102 SI User Manual - Dutch - 21 pages

Worx WR102 SI Installation Guide - French - 19 pages

Worx WR102 SI User Manual - French - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WR102 SI Manual

Product: