Manual Worx WR102 SI (page 11 of 19) (English)

723918

Zoom out

Zoom in

1/19

The charging base has special grooves to secure the boundary

wire and to guide it to the wire terminals. Insert the boundary wire

into the grooves, snap it securely in place.

Take off the cover on the charging base, you will see an IN-wire

terminal (Black) and an OUT-wire terminal (Red). Strip the plastic

from the boundary wire to expose the metal, and connect the

wire to the IN-wire terminal (Black) of the charging base.

NOTE: The extended boundary wire should not exceed 250m or it may cause signal problem. Make sure the wire is straight and tight all

throughout.

1.2

OUT

(Red)

(Black)

Bonjoiur.
Nous avons une tondeuse worx 102 SI laquel n'a jamais donné total satisfaction mais...
Actuellemnt elle tond en marche Ar parfois va en Av, ne fais plus la pelouse de façon complete...
Un des noteur se bloque lorsque actionne celui-ci a la main. Que puis-je faire pour la rementre en ordre.
Submitted on 19-4-2022 at 07:17
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR102 SI in the language / languages: English as an attachment in your email.

The manual is 15,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR102 SI

Worx WR102 SI User Manual - English - 20 pages

Worx WR102 SI Installation Guide - Dutch - 19 pages

Worx WR102 SI User Manual - Dutch - 21 pages

Worx WR102 SI Installation Guide - French - 19 pages

Worx WR102 SI User Manual - French - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WR102 SI Manual

Product: