673102
15
Zoom out
Zoom in
Previous page
1/52
Next page
Lawn Mowing Robot EN
15
provided with your Landroid
®
M. Spare blades are also available at
your nearest WORX retailer.
A. Rotate and flip the blades
Your Landroid
®
M carries 3 Blades that are all screwed onto the
Blade Turning Disc (13). The Blades allow the Landroid
®
M do its
job and need care and attention. Every once in awhile, you should
simultaneously rotate and flip all blades for a perfect cut. When
rotating and flipping the Blades, make sure all the Blades are
adjusted at the same time or else it could make the Blade Disc off
balance. If your Landroid
®
M mows on a normal schedule (daily)
then the Blades should last one season if they are rotated and
flipped every month. Always check to see if the Blades are chipped
or damaged and replace them if they are.
B. Replace the blades (See Fig. L)
After some time, usually every season, your Landroid
®
M’s Blades
will need to be replaced. Your Landroid
®
M does not like mowing
while using Blades of different age and quality. So when replacing
the Blades, make sure to replace all of them at the same time.
You can replace them with one of the three spare Blade kits and
extra Blade screws supplied with your Landroid
®
M.
Before attempting to replace your Landroid
®
M’s Blades, turn the
power off and put on protective gloves. Then follow these steps:
1. Gently flip the Landroid
®
M over.
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver.
4. Firmly screw on the new Blades.
5. Refit the battery and the battery cover.
IMPORTANT: After screwing the Blade to the Blade
Disc, make sure the Blade is able to spin freely.
6.2 Keep It Clean
WARNING: Before cleaning turn your Landroid
®
M
OFF by pressing the ON/OFF Button. Put on
protective gloves before cleaning the Blade Turning
Disc (13) and do not use running water. (See Fig. M, N)
A. Cleaning the body
Your Landroid
®
M will live a much happier and longer life if it is
cleaned regularly. Although, as your Landroid
®
M is an electric
machine, you will need to take care when cleaning, so DO NOT
use a hose, high pressure washers or otherwise pour running
water on your Landroid
®
M, it is best to use a spray bottle filled
with water. When cleaning the machine body use a soft brush
or clean cloth and avoid using solvents or polishes (See Fig. M).
Lastly, make sure that you remove all build up of grass clippings
and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
®
M OFF using the
ON/Off Button and wear protective gloves before touching
the Blade Turning Disc (13).
First, flip your Landroid
®
M upside down to expose its underside.
Here you will see the Blade Disc (a), the chassis (b), and the Front
Wheel (15) and Driving Wheel(10). Clean everything thoroughly
with a soft brush or moist rag (See Fig. N).
Rotate the Blade Disc to make sure it moves freely and that there
M
N
(a)
(b)
L
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WG794 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG794 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WG794

Worx WG794 Installation Guide - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info