673102
14
Zoom out
Zoom in
Previous page
1/52
Next page
Lawn Mowing Robot EN
14
5. Software Update
Your Landroid
®
M software can be updated when new versions
become available. You can check the software version installed on
your machine by pushing the ON/OFF button. The software version
will be displayed in the bottom right hand corner of the display.
(See Fig J1, J2, J3)
The latest software can be downloaded from our website – see
below download and installation instructions;
Step 1: Locate the latest software version at :
www.worxlandroid.com
.
Copy the .bin” file containing the latest software version to a
USB memory stick.
NOTE: Before transferring the “bin” file make sure the
memory stick does not contain other files or data.
Step 2: Remove the battery cover and insert the memory stick
into the USB port .
Step 3: Press the ON/OFF button for ten seconds until the
mower is powered ON. The new software version will be
displayed in the bottom right corner of the display.
Step 4: Remove the memory stick and refit the battery cover.
Step 5: After installing the new software you will need to reset
the diagnostic panel on your mower. Firstly, position the mower
on a horizontal surface.
Press Key “2” to enter the diagnosis interface, then press key “5”
for a few seconds until the three numbers 1 2 & 3 highlighted
below turn back to zero.
6. Maintenance
Your Landroid
®
M needs to be checked from time to time. The
Landroid
®
M works hard and after time needs a good cleaning as
well as having some parts replaced, as they can become worn.
In the following we want to let you know how to take care of your
Landroid
®
M.
6.1 Keep It Sharp
WARNING: Before cleaning, adjusting, or
replacing the Blades, turn your Landroid
®
M OFF
by pressing the ON/OFF Button to OFF and put on
protective gloves.
WARNING: When fitting new blades, make sure
you replace ALL the blades. Always use new
screws when fitting blades . This is important to
ensure blade retention. Failure to use new screws could
cause serious injury.
The Landroid
®
M does not cut grass like other mowers. Its
Cutting Blades (14) are razor sharp on all 4 edges and spin in
both directions for maximum cutting capacity (See Fig. K). Each
blade of your Landroid
®
M has 4 cutting edges. Depending on the
frequency the Landroid
®
M mows your lawn, the cutting blades will
need to be flipped/rotated periodically for a new cutting edge. If
your Landroid
®
M is programmed to mow the lawn every day then
the cutting blades will need to be rotated monthly for the best
mowing results. Each cutting blade will last up to 4 months when
it is programmed to mow every day. When the cutting blades are
dull and worn out, they should be replaced with the spare blades
43
1 2
K
1
2
3
J1
J2
J3
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WG794 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG794 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WG794

Worx WG794 Installation Guide - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info