578151
9
Zoom out
Zoom in
Previous page
1/144
Next page
Lawn Mowing Robot EN
9
3.2 How does my Landroid
®
M
know where to go?
Your Landroid
®
M is capable of doing things on its own. The
Landroid
®
M knows when it needs to go to its Charging Base (4)
to charge, can sense when it is raining, can stop itself if it senses
a problem, and knows to stop, draw back, and then turn around
when it bumps into something blocking its path or other object. The
Landroid
®
M will also automatically stop its Blade Turning Disc (13)
from rotating if it is lifted off the ground to prevent an accident.
A. Finding the charging base
When your Landroid
®
M needs to recharge, it will stop mowing and
follow the Boundary Wire (21) in an anti-clockwise direction back
to its Charging Base. Landroid
®
M is pre-programmed to mow the
grass near the boundary wire once a week. If you want to mow the
grass near the boundary wire at other times, open the panel cover,
press the home button and close the panel cover. Landroid
®
M will
stop mowing, locate the boundary wire and mow the grass near the
boundary wire while it locates the charging station . We suggest you
use this function when the battery power is more than 75%. You can
check the battery power in the display.
B. Rain sensors
The Landroid
®
M is fitted with a Rain Sensor (9) that will detect
rain drops and tell the Landroid
®
M to stop mowing and follow the
Boundary Wire back to its Charging Base (See Fig. B )
The Landroid
®
M is programmable to have a delay start function
(0 – 180 mins) when it rains. When the rain sensors are wet, the
Landroid
®
M returns to its docking station. Only when the rain sensors
become dry will the Landroid
®
M begin the delay start countdown or
return to mowing immediately. See the Programming and Troubleshooting Guide for more details.
C. Sensing the boundary wire
The Landroid
®
M always obeys the border set by the Boundary Wire and uses two sensors at its front to sense when it is
getting close(See Fig. C). Before changing direction, the Landroid
®
M will overrun the Boundary Wire up to 20 cm*.
*This is the recommended distance. Use the provided distance gauge to ensure proper installation.
D. Starting and stopping while mowing (See Fig. D,E)
If you would like to command the Landroid
®
M to stop mowing, then simply press the STOP button (8) on top of the mower.
To start mowing open the Control Panel Cover, press the ON/OFF key and input the PIN code, then press start key and
close the panel cover.
B
C
DD
E
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WG791E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG791E in the language / languages: English, German, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 23,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WG791E

Worx WG791E Installation Guide - English, German - 144 pages

Worx WG791E Installation Guide - Dutch - 20 pages

Worx WG791E User Manual - Dutch - 16 pages

Worx WG791E Installation Guide - Danish, French, Italian, Polish, Portuguese, Spanish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info