Manual Worx WG368E.9 (page 20 of 204) (English, German, Dutch, French, Italian, Polish, Spanish)

576045

Zoom out

Zoom in

1/204

Cordless Chain Saw EN

“Assembly and Tensioning Chain”.

The circular groove of the guide bar will wear

particularly on the lower edge with time.

When replacing the chain turn the chain bar

180° to allow even wear, thus extending chain

bar life.

Check drive sprocket. If it is worn out or

damaged due to strain, have it exchanged by

an authorized service agent.

If the chain bar is worn out or damaged,

take the chain tensioning catch off the bar

by loosing the screw anti-clockwise. Then

ﬁt the tensioning catch into the new bar by

tightening the screw clockwise. The catch

protrude (a) must be ﬁtted into the bar hole.

(See Fig. W)

SHARPENING CHAIN

WARNING: Remove the battery

pack from the saw before

servicing. Severe injury or death could

occur from electrical shock or body

contact with moving chain.

Cutting edges on chain are sharp. Use

protective gloves when handling chain.

Keep chain sharp. Your saw will cut faster and

more safely. A dull chain will cause undue

sprocket, guide bar, chain, and motor wear. If

you must force chain into wood and cutting

creates only sawdust with few large chips,

chain is dull.

LUBRICATE SPROCKET

WARNING: Wear heavy duty gloves

when performing an maintenance or

service to this tool.

Always remove the battery pack from the saw

before performing any service or maintenance

on this tool.

NOTE: It is not necessary to remove the chain

or bar when lubricating the sprocket.

1. Clean the bar and sprocket.

2. Using a grease gun, insert the tip of the

gun into the lubrication hole and inject

grease until it appears at the outside edge

of the sprocket tip. (See Fig. X)

3. To rotate the sprocket release the chain

stop and pull the chain by hand until the

ungreased side of the sprocket is in line

with the grease hole. Repeat the lubrication

procedure.

CLEANING/STORAGE

Clean the moulded plastic housing of the

chain saw using a soft brush and clean

cloth. Do not use water, solvents or polishes.

Remove all debris, especially from the motor

cooling vents.

Remove and brush clean the cover plate,

chain and chain bar after 1 to 3 hours of use.

Clean the area under the cover plate, the drive

sprocket and chain bar assembly using a soft

brush. Clean oil outlet with a clean cloth.

If the chain saw is to be stored for a longer

period of time, clean chain and chain bar.

Store in a secure, dry place out of the reach of

children.

Do not place other objects on the chain saw.

To prevent leakage ensure machine is left in a

horizontal position (oil ﬁller cap 4 uppermost).

When storing machine in original packaging

the oil tank must be completely emptied.

ENVIRONMENTAL

PROTECTION

This product has been marked with a

symbol relating to removing electric

and electronic waste. This means that

this product shall not be discarded with

household waste but that it shall be returned

to a collection system which conforms to the

European Directive 2002/96/CE. It will then

be recycled or dismantled in order to reduce

the impact on the environment. Electric and

electronic equipment can be hazardous for the

environment and for human health since they

contain hazardous substances.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG368E.9 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WG368E.9 Manual

Product: