724661
22
Zoom out
Zoom in
Previous page
1/30
Next page
Air Brush Kit
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL: №. TG212 • 07/2017 • 53633 (toll free)
20
AFTER SALES SUPPORT
(toll free)
Air Brush Kit
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. TG212 07/2017 53633
3. Using a small artist’s bristle brush/ or a make up
brush, gently clean the interior of the glass jar/
metal cup (12/14) (Fig V).
IMPORTANT: DO NOT use cotton buds or similar
items as small fibres can be deposited and cause
a blockage in the air brush nozzle.
4. Carefully spray the cleaning solvent through the
air brush into an old cloth or strong paper towel.
NOTE: To minimize airborne particles in the
atmosphere use additional cloths or paper towels.
5. Wipe away any traces of the air brush cleaning solvent from the exterior of
the air brush gun body. Cleaning should continue until there is no paint
visible in the glass jar/ metal cup (12/14) or on the cloth or paper towel.
CAUTION: The air brush needle (20) is extremely sharp and should be
handled with care to prevent injury.
6. Replace the needle cover (26) ensuring the fitting is screwed on finger
tight.
7. Flush water through the airbrush to remove any airbrush cleaner residue.
Cleaning / Replacing the Air Intake Filter
The function of the compressor is to draw ambient air from the
atmosphere into the compressor where it is compressed and then
discharged from the outlet of the compressor.
As it enters the compressor, the air is filtered to prevent dirt entering the
compressor. This prolongs the life of the compressor and ensures a clean
air flow ready for use.
WARNING: Ensure the compressor is turned off and unplugged from the
mains power before undertaking this task.
1. The air inlet filter (8) is located on the side of the housing of the
compressor (Fig W). The black cap is a push fit and can be easily prised off
with a flat blade screw driver (Fig X).
2. After removing the cover, the small air filter will be exposed (Fig Y).
Remove the air filter (Fig Z).
V.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone TG212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone TG212 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info