724666

Workzone T12VWP Manual

17
Zoom out
Zoom in
Previous page
1/28
Next page
AUS
AFTER SALES SUPPORT
email: help@powertoolsupport.com
1800 909 909
MODEL: T12VW / T12VWP PRODUCT CODE: 51546 12/2015
Phone lines available Monday to Friday, 8am - 6pm.
AUS
AFTER SALES SUPPORT
email: help@powertoolsupport.com
1800 909 909
MODEL: T12VW / T12VWP PRODUCT CODE: 51546 12/2015
Phone lines available Monday to Friday, 8am - 6pm.
17
Operating Instructions
Low voltage cut out
The battery pack used on this tool is fitted with a low voltage cut out feature within the circuitry.
The low voltage cut out feature operates when the voltage drops below a preset value.
This feature automatically stops the drill/driver from operating (similar to that of the overload
condition). When this condition occurs you will need to either insert another battery into the
drill/driver or recharge the existing battery.
The low voltage cut out feature has been added to maximise the drill/driver’s life. When this
occurs, recharge the battery pack by following the battery charging section in this manual.
Note: Attempting to restart the drill/driver without either recharging the battery or installing
another battery (with charge) will lead to drill/driver restarting and then stopping again, after
only a few seconds of operation.
Forward/reverse switch
Note You can only change the direction of rotation of the drill/driver
using the forward/reverse switch when the trigger is NOT depressed.
This forward/reverse switch (2) will allow you to change the direction
of the motor while the trigger switch (3) is not depressed. (See Fig. 7)
Drilling uses the forward mode. The reverse mode is intended for the
removal of screws and assisting to remove jammed drill bits.
Adjustable torque
This drill/driver is equipped with 17 torque settings plus one drill setting
which are controlled by the torque collar (8). All of the torque settings
are clearly identified on the torque collar. To adjust the torque setting
you rotate the torque collar. The higher the number, the higher the
torque settin
g.
Controlling the torque allows for better control when using the
drill/driver on specic screwing tasks and prevents over-fastening
and over-tightening.
Operating Instructions
8
Fig. 7
Fig. 8
51546 IM ed5.indd 17 15/9/15 7:00:41 PM
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone T12VWP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone T12VWP in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info