734948
10
Zoom out
Zoom in
Previous page
1/16
Next page
18 19
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
+353 (0) 19022605
GB
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
+353 (0) 19022605
GB
Q1W-SP14-1900A
Q1W-SP14-1900A
+44 (0) 190 472 7501
+44 (0) 190 472 7501
Pull the nozzle head forward to lower the pressure and push the nozzle head back to
raise the pressure. (Figure 15)
By turning the nozzle head through 180°, you can adjust the width of the jet from
spot jet to at jet:
Turn the nozzle head counterclockwise to set a spot jet. The further you turn the
nozzle head in a clockwise direction, the wider the flat jet becomes. (Figure 16)
NOTE
The spot jet is especially suitable for cleaning very soiled, narrow places,
whereas the at jet is ideal for cleaning wide areas.
Using the turbo lance
The turbo lance (9) creates a rotating jet of water which can be used to remove
stubborn dirt.
ATTENTION
When you use the turbo lance, there is a very great risk of damaging sensitive
surfaces. Apply it carefully, starting o with a large working distance and
reducing it as required.
Stop the machine and switch the ON/OFF switch to OFF.
Press the trigger on the spray gun briefly to reduce the system pressure.
Insert the turbo lance instead of the spray lance. (Figure 4)
Using the rotating brush
The rotating brush (8) is a tool for cleaning surfaces with care. The brush is driven here
by the high-pressure jet, and the water only strikes the surface being cleaned at low
pressure.
The cleaning eect is achieved by the action of the brush, and the loosened dirt is
washed away by the water.
Stop the machine and switch the ON/OFF switch to OFF.
Press the trigger on the spray gun briefly to reduce the system pressure.
Insert the rotating brush instead of the spray lance or the turbo lance.
(Figure 5)
Automatic feed of detergents
WARNING
Only use the detergents supplied or recommended by the manufacturer.
Thesafety of the machine may be adversely aected if you use other
detergents or chemicals.
Following direct contact between the detergent and your skin or mucous
membrane, rinse with lots of clear water and seek medical attention,
ifnecessary.
This high-pressure washer is equipped with a device for automatically feeding
detergents to the jet of water. Procedure for using this function:
Lock the trigger on the spray gun by flipping the yellow safety catch up until it
becomes engaged. (Figure 13)
Remove the sealing cap from the detergent tank (1) on the back of the machine and
pull the hose out. (Figure 14)
Take the detergent tank o the bracket and ll it with detergent.
Place the detergent tank back onto the bracket, reinsert the hose and replace the
sealing cap.
Fit the adjustable spray lance (10) onto the spray gun.
Set the nozzle head to the low pressure position by pulling it forward. (Figure 15)
Disengage the safety catch and press the trigger on the spray gun to start work.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone Q1W-SP14-1900A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone Q1W-SP14-1900A in the language / languages: English as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Workzone Q1W-SP14-1900A

Workzone Q1W-SP14-1900A User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info