734948
8
Zoom out
Zoom in
Previous page
1/16
Next page
14 15
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
+353 (0) 19022605
GB
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
+353 (0) 19022605
GB
Q1W-SP14-1900A
Q1W-SP14-1900A
+44 (0) 190 472 7501
+44 (0) 190 472 7501
Fitting the water intake adapter (Figure 6)
Remove the protective cap from the threaded connector of the high-pressure washer
and screw the adapter for the water intake (14) onto the threaded connector, hand-
tightened.
NOTE
Take good care of the protective caps for the storage of the machine.
Connecting the intake hose to the machine (Figure 7)
Connect the intake hose to the high-pressure washer with a quick-action coupling
(notincluded in the scope of supply) using the adapter for the water intake (11).
Connecting the intake hose to the water supply (Figure 8)
WARNING
The machine may not be connected directly to the drinking water supply.
Inthis case, use a water backow preventer or an intake hose set approved
inaccordance with IEC 61770.
Connect the intake hose to the water supply and open the intake valve. The temperature
of the water may not exceed 40 °C.
Switching o the mains switch (Figure 9)
Ensure that the ON/OFF switch on the machine is switched off
(at the OFF position).
Creating a mains connection (Figure 10)
Insert the mains plug into a correctly installed socket with an earthing contact with
anAC voltage supply in accordance with the machine's rating plate.
Operation
WARNING
Familiarise yourself with all the operating features before putting the
machine into operation. Ensure before use that the machine is in proper
working order.
Wear suitable clothing, as well as ear protectors and goggles when working
with the machine.
Check that the machine is in a safe state:
Inspect the machine and accessories for visible damage.
Check that all the parts of the machine are securely fixed in place.
Check that there are no leaks from the water connection and high-pressure pipes.
Starting and stopping
ATTENTION
Never operate the machine without water because the pump may damage if
run dry. If the intake water is impure, use a water lter.
Starting
1. Open the valve for the water intake. (Figure 8)
2. Disengage the yellow safety catch on the spray gun by pushing it down until it
clicks in place.
3. Press the trigger until a steady stream of water is discharged. (Figure 11) Then
release the trigger.
4. Set the ON/OFF switch to ON in order to switch on the machine. (Figure 12)
5. Press the trigger again to commence the cleaning work.
Stopping
1. Release the trigger.
2. Set the ON/OFF switch to OFF in order to switch off the machine. (Figure 9)
3. Briefly press the trigger until the machine is depressurised.
4. Lock the trigger by flipping the yellow safety catch up until it becomes engaged.
(Figure 13) This prevents it from being started again inadvertently.
5. Close the valve for the water intake.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone Q1W-SP14-1900A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone Q1W-SP14-1900A in the language / languages: English as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Workzone Q1W-SP14-1900A

Workzone Q1W-SP14-1900A User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info