724664

Workzone JH1000-01 Manual

14
Zoom out
Zoom in
Previous page
1/22
Next page
Jawzilla Portable Clamping Jaws
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. JH1000-01 • 03/2016 • 52539
(toll free)
12
AFTER SALES SUPPORT
(toll free)
Jawzilla Portable Clamping Jaws
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. JH1000-01 • 03/2016 • 52539
NOTE: You will need to remove the rail push handle (1) to clamp your
work piece / clamping material. The rail push handle (1) can be removed
by rotating the handle in an anti-clockwise direction until completely
removed. When the rail push handle requires re-installing rotate the rail
push handle (1) in a clockwise direction until securely fastened.
5. To lock the clamping material in between the fixed clamping jaw (12) and
the moving clamping jaw (13), push down the clamp locking lever (11) to
the locking position (Fig M), then using your foot, push down the clamp
foot pedal (8) to fully secure the clamping material in place (Fig N) .
Folding the Clamping Jaws for Storage
1. Place the clamping jaws in the upright position so that the fixed clamping
jaw is sitting on the ground (Fig R).
2. To release the rear folding leg (5), first loosen the rear leg release knob (4)
in an anticlockwise direction (Fig S).
3. Pull the rear folding leg (5) out from the rear leg securing slot (14) so that
it can unfold down.
4. Before inserting the rear folding leg into the front securing slot (15), the
clamp foot pedal (8), needs to be released and folded upwards. To do
this, pull down on the foot pedal folding release lever pulling it towards
you (Fig U). This will disengage the clamp foot pedal from the clamp
locking mechanism.
5. Whilst holding the rear folding leg (5) up lift the foot clamp pedal from
the ground up until it nestles just under the rear leg securing slot (Fig V).
6. Whilst holding the clamp foot pedal up in the lock position, fold down the
rear folding leg (5) towards the front securing slot (15), then lift the leg up
slightly to be able to position the end of the rear folding leg into the front
securing slot (15) (Fig W), then push back down into the front securing
slot (15) to lock into place.
7. Tighten the rear leg release knob (4) in a clockwise direction to fully
secure into position.
8. To fold up the front folding leg/s (7), first release the front leg locking
knob by pulling it towards the foot of the front folding leg (7) (Fig X),
which will release the leg from its locked position.
Folding
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone JH1000-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone JH1000-01 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info