724664

Workzone JH1000-01 Manual

10
Zoom out
Zoom in
Previous page
1/22
Next page
Jawzilla Portable Clamping Jaws
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. JH1000-01 • 03/2016 • 52539
(toll free)
8
AFTER SALES SUPPORT
(toll free)
Jawzilla Portable Clamping Jaws
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. JH1000-01 • 03/2016 • 52539
Portable Clamping Stand Assembly
The following assembly is required to prepare the product for use:
1. Remove the portable clamping jaws from the box and place on a flat
and level surface in the upright position so that the fixed clamping jaw is
sitting on the ground (Fig A).
2. Turn the rear leg release knob (4) in an anti clockwise direction to loosen
(Fig B).
3. Pull out the rear folding leg (5) slightly until the leg is above the front
securing slot (15) (Fig C).
4. Before being able to fully extend the rear folding (5) leg into position,
slide the leg downwards (Fig D), and then fully extend the rear folding leg
outwards (Fig E).
5. Once the rear folding leg (5) is fully extended outwards, push the leg back
into the rear securing slot (14) so it is secure (Fig F).
NOTE: When the rear folding leg is secure, the leg will not be able to
move in any direction.
6. Secure the rear folding leg (5) into position by tightening the rear leg
release knob (4) in a clockwise direction (Fig B).
7. Pull down the foot pedal (8) fully to the ground until you hear a click to
indicate the foot pedal (8) is engaged and locked into position (Fig G).
NOTE: If you have difficulty engaging the locking mechanism on the foot
pedal, tilt the unit slightly backwards so the foot pedal (8) can be pushed
down further to the ground to allow engagement.
8. To release the front folding leg/s (7), push in the front leg lock notch
(10) to release the front folding leg (5) from the locking position (Fig H),
then pull the leg out and downwards to the ground until you hear a click
which indicates the leg is locked into position (Fig I). Repeat for the 2nd
front folding leg (5).
9. The portable clamping jaws is now assembled and can be turned over
onto its feet.
WARNING: Take care when lifting or moving the clamping jaws.
Ensure you use the correct lifting techniques when lifting heavy
objects. Prior to using the portable clamping jaws ensure it is located on a
flat and level surface where all three legs are touching the ground.
Assembly
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone JH1000-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone JH1000-01 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info