809329

Worcester Greenstore Ground Source Manual

6
Zoom out
Zoom in
Previous page
1/28
Next page
CONTROL UNIT
6 720 802 172 (2012/06)6
7 CONTROL UNIT
The control unit controls and monitors the heating and hot water
production with the heat pump and additional heat. The monitoring
function shuts down the heat pump in the event of a fault so as to prevent
damage to critical parts of the pump.
7.1 ADDITIONAL HEAT
The additional heat becomes active in the event of emergency operation,
extra hot water and hot water peak.
The additional heat is provided through electric additional heat.
The Multi module accessory is required for mixed additional heat.
The control unit will automatically activate the additional heat, when
needed.
7.2 HOT WATER PRODUCTION
Hot water is heated in the domestic hot water cylinder and the control
unit gives priority to hot water before production of heating water
according to the settings that are made. The domestic hot water cylinder
is fitted with a sensor that senses the temperature of the domestic hot
water.
8 CONTROL PANEL
Settings for the control of the heat pump are made with the control unit's
control panel, which also provides information about current status.
8.1 PANEL OVERVIEW
Fig. 3 The control panel
[1] On/Off button
[2] Mode button
[3] Info button
[4] Menu dial
[5] Status lamp
[6] Return button
[7] Menu button
[8] Menu display
8.2 ON/OFF BUTTON
Use the On/Off button to turn the heat pump on and off.
8.3 STATUS LAMP
8.4 MENU DISPLAY
Use the menu display in order to:
• View information from the heat pump.
• View available menus.
• Change set values.
8.5 MENU BUTTON AND MENU DIAL
Use to get from Initial menu to the menus. Use the menu dial in
order to:
• Navigate the menus and get to the setting displays.
– Turn the dial to see more menus on the same level or change a set
value.
– Press the dial to change to a lower menu level or save a change.
8.6 RETURN BUTTON
Use to:
• Go back to the previous menu level.
• Leave a setting display without changing the set value.
8.7 MODE BUTTON
Use to change type of operation.
8.8 INFO BUTTON
Use to see information from the control unit about operating
mode, temperature, program version, etc.
The lamp lights continuously. The heat pump is running.
The lamp flashes rapidly. There is an alarm that has not been
acknowledged.
The alarm has been acknowledged
but the alarm cause remains.
The lamp flashes slowly, menu
window not lit.
The heat pump is in stand-by mode1).
1) Stand-by means that the heat pump control unit has been turned off but with
electrical power still supplied to the unit.
The lamp and menu display not
lit.
No voltage to the control unit.
Table 2 Lamp functions
The controller language can be changed with the
button.
▶ Press the button in the initial menu for at least 5
s, then select the required language.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester Greenstore Ground Source at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester Greenstore Ground Source in the language / languages: English as an attachment in your email.

The manual is 3.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info