Manual Worcester-Bosch Greenstar Sense I (page 11 of 20) (English)

809351

Zoom out

Zoom in

1/20

Information for installer

6 720 648 748 (2014/03)

▶ Use a cable of at least type H05 VV-... (NYM-J...).

▶ In the case of external inductive interferences (e.g. from PV systems), use

shielded cables (e.g. LIYCY) and earth the shield on one side. Connect the shield

to the building's earthing system, e.g. to a free earth conductor terminal or water

pipe.

▶ Make sure low-voltage cables are routed separately from mains voltage cables

(min. clearance 100 mm).

▶ If more than 2 Sense I are going to be installed, a wiring module may be required

dependent upon the heat source..

▶ If the conductor cross-sections are different, use the junction box to connect the

BUS nodes.

Maximum total length of BUS connections:

•100 m with conductor cross-section = 0.50 mm2

•300 m with conductor cross-section = 1.50 mm2

Fig. 5 Making BUS connection between Sense I and boiler

For designation of the BUS connector terminal and further information on the boiler

please refer to the technical documentation of the boiler.

6 720 648 748-03.2O

EMS/BB

BUS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar Sense I in the language / languages: English as an attachment in your email.

The manual is 0.92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worcester-Bosch Greenstar Sense I Manual

Product: