Manual Worcester-Bosch Danesmoor (page 7 of 12) (English)

809219

Zoom out

Zoom in

1/12

Full instructions on how to install and operate the optional facia-

mounted programmer are included with the programmer kit.

If your boiler operates on gravity feed, the system will only

function correctly on heating if the programmer switches on the hot

water programme at the same time. To ensure that this is always the

case, the programmer is supplied with a gravity system switch on the

rear of the unit; this switch must be set to G by your installer.

The programmer gives fully independent programmes for

central heating (CH) and hot water (HW) when the switch on the

rear of the unit is set to P and the boiler is installed with a fully-

pumped system.

Many calls made to Worcester Heat Systems to report boiler

faults or breakdowns prove to be false alarms, as there is often a

simple explanation for the apparent malfunction.

So, to help you save time and money - not to mention

frustration and inconvenience - a quick-reference fault finder is

included on page 8.

If, after checking through the points suggested, there is still a

fault you should call your local Worcester Heat Systems Service

Centre. Arrangements will be made for an engineer to call as soon

as possible.

CALL-OUT CHARGES

All of Worcester Heat Systems’ field service engineers are

factory trained.

If you request a visit from an engineer and your boiler has been

installed within the last 24 months, no charge will be made for

parts and/or labour providing:

●The appliance was commissioned correctly on installation

and a completed Guarantee Registration Card returned to

Worcester Heat Systems.

●An appliance fault is found and the appliance has been

installed within the past 24 months, provided that the first

annual service has been carried out on a boiler which is more

than 12 months old. Reasonable evidence of this must

be supplied on request.

OPERATING YOUR

PROGRAMMER CONTROLS

FAULTS & BREAKDOWNS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Danesmoor in the language / languages: English as an attachment in your email.

The manual is 2.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worcester-Bosch Danesmoor Manual

Product: